M1A Rifles Topics M1A Rifle Topics http://m1arifles.com/forum Fri, 17 May 2013 18:01:52 +0000 10 Random update on my boomstick, couple questions also http://m1arifles.com/forum/index.php/topic/3532-random-update-on-my-boomstick-couple-questions-also/
On the positive side, I got an early tac-light for my Bday, it's a 200 lumen max, and I think like 50 lumen low setting light.  I have it mounted in my foregrip, I just squeeze a trigger built into the foregrip and I have light.  

I was looking at getting the Plano case that the NRA carries, my stepfather got one for his Sig Ar-15 and it's a really sweet case IMO.  I checked my rifle against it, and it is literally like 1/8-3/8th's of an inch too long to fit.  With the stock folded, it's actually taller than the case is when it's shut.  So it looks like I'll be trying to get the larger one for my Bday, but the only thing that sucks is that it's a lot larger than I honestly need, and is going to therefore be a lot heavier and harder to wield.  They also don't sell the larger case with the pluck foam, which I was really hoping to get.

Right now, I've got the bipod mounted as close to the mag well as I can without blocking it from being able to take magazines while folded.  The rifle is extremely balanced in this set-up, and requires almost no muscle effort to maintain a positive shoulder weld, or keep both hands firmly on their respective grips.  I'm hoping that, with the Troy stock's design, added weight, and the USCG muzzle brake, there will be little to no barrel climb, so that I won't have to worry about the bipod not being toward the front.  When I sit with the rifle in my shoulder, the only real muscle im using is in my neck to keep my sight picture.  I've never had a more natural and relaxed feeling in a bench shooting stance.

I'm curious on two things.  Will it be ok to fire the rifle with the bipod mounted by the mag well?  The other question I'm curious on is firing this big bastid without using the shoulder as a point of contact: IE firing it with the stock folded and having the pistol and foregrips as my only points of contact.  I'm assuming with the weight and brake that it wont break my wrists or slam me in the face?  I've never fired anything over a .223 without a positive shoulder weld, but I am 6'5" 290 lbs.

I just hate this waiting.  Thanks to the ammo situation, I probably won't take the rifle to the range until I get every last part in, so July looks like the answer.  Hopefully I can pick up a summer job and grab that FNX-45 and some ammo (.45 ACP isn't as hard to get atm as 7.62 NATO), and take it to the range at the same time.]]> Fri, 17 May 2013 18:01:52 +0000 http://m1arifles.com/forum/index.php/topic/3532-random-update-on-my-boomstick-couple-questions-also/ Federal/Lake city grain differences for same round type http://m1arifles.com/forum/index.php/topic/3506-federallake-city-grain-differences-for-same-round-type/ Thu, 25 Apr 2013 22:06:39 +0000 http://m1arifles.com/forum/index.php/topic/3506-federallake-city-grain-differences-for-same-round-type/ Boresnake question http://m1arifles.com/forum/index.php/topic/3526-boresnake-question/ Mon, 22 Apr 2013 01:57:05 +0000 http://m1arifles.com/forum/index.php/topic/3526-boresnake-question/ <![CDATA["NM" gas cylinder]]> http://m1arifles.com/forum/index.php/topic/3507-nm-gas-cylinder/ http://www.brownells.com/rifle-parts/gas-system-parts/gas-system-hardware/cylinders/m1a-m14-nm-gas-cylinder-sku817030400-12579-30140.aspx

http://www.midwayusa.com/product/256482/springfield-armory-national-match-gas-cylinder-m1a-steel-blue

They are NOT unitized, so is there any difference between these and what comes on the standard?]]> Tue, 26 Mar 2013 00:39:56 +0000 http://m1arifles.com/forum/index.php/topic/3507-nm-gas-cylinder/ Shim question http://m1arifles.com/forum/index.php/topic/3504-shim-question/ When shimming the gas block, does the shim go on before the front plate, or between the front plate and the gas block? Mon, 18 Mar 2013 20:39:01 +0000 http://m1arifles.com/forum/index.php/topic/3504-shim-question/ M62 tracer rounds http://m1arifles.com/forum/index.php/topic/3502-m62-tracer-rounds/
I'm wondering if the fact that they list it as 142 grains has anything to do with it?  Everywhere on the internet that I'm reading lists the m62 as a 146 grain round from lake city.  Even then, I figured people would be jumping all over it.  Is there some inherent disadvantage to using tracer rounds?]]> Fri, 15 Mar 2013 11:57:06 +0000 http://m1arifles.com/forum/index.php/topic/3502-m62-tracer-rounds/ <![CDATA[Schuster's non adjustable vented gas plug?]]> http://m1arifles.com/forum/index.php/topic/3487-schusters-non-adjustable-vented-gas-plug/
Anyone have some personal experience with the non-adjustable one?]]> Sun, 03 Mar 2013 20:09:08 +0000 http://m1arifles.com/forum/index.php/topic/3487-schusters-non-adjustable-vented-gas-plug/ Trajetech? http://m1arifles.com/forum/index.php/topic/3483-trajetech/ Wed, 27 Feb 2013 00:33:35 +0000 http://m1arifles.com/forum/index.php/topic/3483-trajetech/ CMI mags currently in stock http://m1arifles.com/forum/index.php/topic/3479-cmi-mags-currently-in-stock/ Unfortunately they are limited to two mags per customer.
Get them while you can!]]> Tue, 26 Feb 2013 03:43:25 +0000 http://m1arifles.com/forum/index.php/topic/3479-cmi-mags-currently-in-stock/ Fusion MSR ammo http://m1arifles.com/forum/index.php/topic/3481-fusion-msr-ammo/ Ammo being what it is now I am tempted to buy all of them $23 a box. What ya think?

RAL]]> Mon, 25 Feb 2013 13:16:19 +0000 http://m1arifles.com/forum/index.php/topic/3481-fusion-msr-ammo/ Painting the USCG muzzle break http://m1arifles.com/forum/index.php/topic/3473-painting-the-uscg-muzzle-break/
I'm sure my buffer tube will suffer from the same issue if it ever gets here.]]> Fri, 22 Feb 2013 00:14:00 +0000 http://m1arifles.com/forum/index.php/topic/3473-painting-the-uscg-muzzle-break/ Curious http://m1arifles.com/forum/index.php/topic/3467-curious/
I've seen that you can put this system on Saiga 12's, and from what I've seen it's purely based off of your buffer tube, at least the AR one is.  So would a Troy mcs with a collapsing buffertube be capable of using one of these, or any system that utilizes AR buffer tubes (Vltor is the only other one I can thing of off the top of my head)?

I'm assuming this stuff operates by not having a pistol grip attached to the chassis, but instead it free floats inside the buttstock.

Tried finding something on youtube regarding an M1A with slide fire, but it's just a bunch of silly bumpfiring.]]> Wed, 13 Feb 2013 22:36:35 +0000 http://m1arifles.com/forum/index.php/topic/3467-curious/ Scout vs. Standard http://m1arifles.com/forum/index.php/topic/3397-scout-vs-standard/ Fri, 08 Feb 2013 18:02:31 +0000 http://m1arifles.com/forum/index.php/topic/3397-scout-vs-standard/ Planning my build http://m1arifles.com/forum/index.php/topic/3447-planning-my-build/
I've already got the chassis, so now I'm looking at the following:

GG&G Eotech 512 with lens covers
7X flip up magnifier
SEI good iron muzzle break
Sadlak Spring guide, recoil buffer and titanium piston
tango down foregrip
mako pistol grip
folding stock mechanism
vltor RE2 bufferless buffer tube, castle nut and end plate (might need 2 of the last for the FSM, dont know yet)
vtlor emod buttstock
BUIS
Vltor Modpod
laser
Sadlak Mag release latch

Anything ya'll don't see that you would do?

What do ya'll think of Vltor's Modpod?

Anyone mind commenting on the angle of pull for the trigger after a pistol grip?  Are those expensive trigger sleeves worth grabbing?]]> Tue, 05 Feb 2013 23:46:09 +0000 http://m1arifles.com/forum/index.php/topic/3447-planning-my-build/ Ordering directly from CMI http://m1arifles.com/forum/index.php/topic/3460-ordering-directly-from-cmi/
Crazy!]]> Sun, 03 Feb 2013 02:40:14 +0000 http://m1arifles.com/forum/index.php/topic/3460-ordering-directly-from-cmi/ M1A ammo ??? http://m1arifles.com/forum/index.php/topic/3393-m1a-ammo/
I have just purchased an M1A new out of the box.. The manual states only to use 7.62 Nato rounds.....Is this fact or can I use 308 Winchester. Or a Federal Gold Match ??? The gold match are very expensive. 31.99 per box of 20 and a better quality than the Nato rounds. Can someone please school me on what to ammo to use?

Iray]]> Sun, 03 Feb 2013 02:38:03 +0000 http://m1arifles.com/forum/index.php/topic/3393-m1a-ammo/ Mag craze!! http://m1arifles.com/forum/index.php/topic/3399-mag-craze/ They are extremely difficult to get and if you do find somebody who has them in stock, but prepare to open up your wallet wide.
I did much searching and stocked up on reasonably priced mags and even bought some extras. I figured the extras would be a good financial investment if nothing else.
In case you guys are looking, this is what I've found that may help you.
44mag.com has Theromold polymer M14 mags. I've not tried them, but everyone I've talked to that has, swears by them.
dillionprecision.com has ProMag M14 mags. I have tried these and they work great. Unlike earlier ProMag M14 mags that were blued, the ones now are parkerized.
ustacticalsupply.com has CMI M14 mags, for now. They are a little more than what I've paid in the past from 44mag, but not much more and they are the only place I found that has them in stock.
dpms.com has AR mags that have aluminum bodies.
bushmaster.com has AR mags.
I've not found Magpul Pmags anywhere, without paying through the nose for them. I did find some locally from a friend that has a shop.
I did backorder some Pmags and was assured my order will be filled next month, we shall see.
If you guys are even thinking about mags, I'd strongly suggest you buy them now before Obama puts an end to it all.
My buddy with the shop told me to buy all I could lay my hands on. He said his resources have almost dried up. He said the same thing about AR's as well. Best of luck!!

]]> Tue, 29 Jan 2013 23:33:51 +0000 http://m1arifles.com/forum/index.php/topic/3399-mag-craze/ Recoil Buffer? http://m1arifles.com/forum/index.php/topic/3453-recoil-buffer/
To take a look at it and read the desciption, go to:http://www.desertwarriorproducts.com/M1A-M14-Accurizing.html.

Does anyone here have any experience with these?? The theory sounds good but thought I would get some thoughts from the experts here before sending in my cash.

Thanks!

Clark]]> Mon, 28 Jan 2013 04:47:09 +0000 http://m1arifles.com/forum/index.php/topic/3453-recoil-buffer/ Magazine Identification please http://m1arifles.com/forum/index.php/topic/3449-magazine-identification-please/
Here are the pics:

http://i83.photobucket.com/albums/j297/Greatwhitesamuri/IMAG0027_zps04a66c54.jpg

http://i83.photobucket.com/albums/j297/Greatwhitesamuri/IMAG0026_zps2f6b41ce.jpg

http://i83.photobucket.com/albums/j297/Greatwhitesamuri/IMAG0025_zpsb66fe8d2.jpg

http://i83.photobucket.com/albums/j297/Greatwhitesamuri/IMAG0024_zps1b187244.jpg

http://i83.photobucket.com/albums/j297/Greatwhitesamuri/IMAG0023_zps874462cb.jpg

http://i83.photobucket.com/albums/j297/Greatwhitesamuri/IMAG0022_zpsd0c86264.jpg

http://i83.photobucket.com/albums/j297/Greatwhitesamuri/IMAG0021_zpsa89c7c5f.jpg]]> Sun, 27 Jan 2013 01:40:47 +0000 http://m1arifles.com/forum/index.php/topic/3449-magazine-identification-please/ <![CDATA[Why we own our M1A's..........]]> http://m1arifles.com/forum/index.php/topic/1982-why-we-own-our-m1as/ Sun, 27 Jan 2013 00:49:33 +0000 http://m1arifles.com/forum/index.php/topic/1982-why-we-own-our-m1as/ New mag prices at 44mag http://m1arifles.com/forum/index.php/topic/3443-new-mag-prices-at-44mag/ Fortunately, I've plenty of CMI mags and don't need anymore.
I'm buying up original 60s USGI mags now. I'm not getting them necessarily for use, but more as collectors items.  That is when I find them at good prices. Seems all this mag craze has not effected the 60s USGI mags in prices too much. They are still selling about what they were before all this panic started. I guess guys don't realize that they are damn good mags, even though they were manufactured many years ago.]]> Mon, 21 Jan 2013 10:37:24 +0000 http://m1arifles.com/forum/index.php/topic/3443-new-mag-prices-at-44mag/ caliber http://m1arifles.com/forum/index.php/topic/3430-caliber/ Mon, 14 Jan 2013 04:07:55 +0000 http://m1arifles.com/forum/index.php/topic/3430-caliber/ Optics for M1A Scout? http://m1arifles.com/forum/index.php/topic/3410-optics-for-m1a-scout/
Anyway, my question regards optics.I have a Scout and have been shopping for red dot's for quite awhile and at this point am leaning towards one of the Aimpoints.  However, I have decided to get a Beretta CX 4 carbine
to compliment my M9A1 pistol and that is going to be adequate for any situation out to 75 to 100 yards. Making that purchase will make my M1A the "go to" rifle for longer distances.

So, has anyone ever mounted a standard rifle scope on the forward rail of the scout? The main issue I see would be being able to get my eye close enough to get a full view through the scope.

I can get the Sadlak mount but if I can save the $250.00 or so and mount directly to the existing rail, I would prefer that route.

Suggestions always welcome. May everyone have a great 2013!

Clatk]]> Mon, 07 Jan 2013 20:40:28 +0000 http://m1arifles.com/forum/index.php/topic/3410-optics-for-m1a-scout/ M1A The Journey.... http://m1arifles.com/forum/index.php/topic/3417-m1a-the-journey/
SWFA SS 10x42 mildot scope $299.00
Sun shield (cause it looks cool) $39.00
Butler Creek flip up scope covers   $15.00
Badger rings 30mm   $79.00
Ordered from SWFA.... excellent experience as well  and I LOVE THE SCOPE

gunsmith mounting the scope: $60.00

SA Aluminum scope mount gen 4 $119.00 (I know... but I'm actually quite happy with it after adjustments)
leopold rings (SA rings) 1"  - $7.00   (wrong size, cause i changed scopes due to Nikon back order)
Leather sling from SA     $49.00
Neetsfoot oil (to treat the sling) $7.00
Softsided Tactical rifle case     $79.00
20 round magazines: (2) $79.00
5 round magazines: (1)   $24.00
Cleaning kit:   $14.00 (this actually sucks pretty bad, but the gas tube wrench works)
All came from Springfield, mainly with a significant new buyer coupon

Harris bipod   $89.00 (mounting stud included, gunsmith installed no charge)
Sadlak NM spring guide $40.00
Recoil buffer $15.00
Gas piston cleaning kit    $29.00
Gas tube shim rings:   $10.00
Fulton Armory Kydex adjustable cheek rest  $49.00
from fulton armory, outstanding experience, delivered by Christmas eve.

lace up cheek rest:  it does the job, but it gets loose, its annoying, it's replaced.  15.00

Total spent to date on M1A:   2312.00 +shipping expenses, roughly 100 bucks:  2412.00 total spent.

Really, for the amount spent I have a wonderful rifle that is accurate, accessorized how I want it and a joy to own...
Now, since I started playing with this, Ive discovered I have a talent for working with rifles, and I enjoy tweaking them quite a bit, I'm currently working on refinishing a marlin 336, refinishing the stock and did an action job on it.  So, I scored a new hobby as well.. I think it was a good investment.]]> Thu, 03 Jan 2013 18:08:54 +0000 http://m1arifles.com/forum/index.php/topic/3417-m1a-the-journey/ Pre-ban M1A http://m1arifles.com/forum/index.php/topic/3421-pre-ban-m1a/ Wed, 02 Jan 2013 04:25:50 +0000 http://m1arifles.com/forum/index.php/topic/3421-pre-ban-m1a/ Glass Bedding M1A http://m1arifles.com/forum/index.php/topic/3418-glass-bedding-m1a/
Should I do it?

How do I do it?

Standard M1A]]> Mon, 31 Dec 2012 15:09:01 +0000 http://m1arifles.com/forum/index.php/topic/3418-glass-bedding-m1a/ Some questions about random stuff http://m1arifles.com/forum/index.php/topic/3406-some-questions-about-random-stuff/
First question I've got is Mako Group, are they a crap low quality company?  Or is their stuff decent?  I'm leaning towards their pistol grip, and am half considering their buttstock that has a rising cheek support and a storage compartment in it (the other stock im considering is the Vltor Emod).

Second question is about bipods.  I'm hoping to get something that can handle a 250 lb 6'5 guy leaning on it and not collapse or break, and I want it to swing forward and lock.  I remember seeing some discreet ones that individually lock to the opposite sides of a rifle if you have rails, which the troy mcs does, but I dont know if they can tolerate a bigger guy, or if they traverse well.  I don't really want to drop 250-400 bucks on a bipod, but if that's the only way to get a useful and reliable one then I guess I have no choice.

Back to Mako, they also have the flip up magnifiers that work with the Eotech, and they aren't as expensive as the eotech or aimpoint stuff, there's a video on youtube of a guy with a mako mag, and it seems to be nice, but I'd like some first hand opinions from people here.

Thanks for any comments, and have a merry christmas!]]> Tue, 25 Dec 2012 04:24:09 +0000 http://m1arifles.com/forum/index.php/topic/3406-some-questions-about-random-stuff/ Finally fired some rounds! http://m1arifles.com/forum/index.php/topic/2995-finally-fired-some-rounds/ Thu, 20 Dec 2012 17:44:30 +0000 http://m1arifles.com/forum/index.php/topic/2995-finally-fired-some-rounds/ Stupid prices http://m1arifles.com/forum/index.php/topic/3360-stupid-prices/ Wed, 19 Dec 2012 00:52:04 +0000 http://m1arifles.com/forum/index.php/topic/3360-stupid-prices/ New Scout Squad Owner http://m1arifles.com/forum/index.php/topic/2880-new-scout-squad-owner/
I would like some advice on what I should have on hand or replace on my M1A S/A scout squad. This rifle did not come with a GI cleaning kit. I am just looking for items like certain springs or things that seem to wear out or break.

I will load a pic later.

Thanks for your help,

FiremanBiL]]> Wed, 12 Dec 2012 18:15:28 +0000 http://m1arifles.com/forum/index.php/topic/2880-new-scout-squad-owner/ M1a and Steel Case http://m1arifles.com/forum/index.php/topic/3390-m1a-and-steel-case/
Has anyone had any problem firing .308win with steel casing? I have had no problem in shooting steel casing from my SKS, but wasn't sure with the M1a.

Thanks for your time.

Robert T.]]> Wed, 12 Dec 2012 05:50:37 +0000 http://m1arifles.com/forum/index.php/topic/3390-m1a-and-steel-case/ Rounds down range http://m1arifles.com/forum/index.php/topic/3380-rounds-down-range/
100 yards, it gets a bit squirrely, but that's shooter not rifle.   I have 0 accesssories on it to help me out in the accuracy department.  

So, when I got to work today:  it was Christmas !!     I received my SWFA SS 10x42 scope, a steel springfield gen 4 mount (i know... sadlak or smith but this was 40% off... Ill give it a go)  They sent with it Leopold mounts... and they are way not what I want, sending them back.  

I have a harris bipod on order now, should be here by end of the week and that should do it for a while.  Ill post a pic when i get it together.]]> Sat, 08 Dec 2012 21:17:29 +0000 http://m1arifles.com/forum/index.php/topic/3380-rounds-down-range/ First on the block to try... http://m1arifles.com/forum/index.php/topic/3385-first-on-the-block-to-try/
Posted Image]]> Fri, 23 Nov 2012 17:47:35 +0000 http://m1arifles.com/forum/index.php/topic/3385-first-on-the-block-to-try/ Personal Defense Round http://m1arifles.com/forum/index.php/topic/3183-personal-defense-round/
Any ideas, suggestions, or experience?????]]> Tue, 20 Nov 2012 22:20:34 +0000 http://m1arifles.com/forum/index.php/topic/3183-personal-defense-round/ <![CDATA[Can't decide!!!]]> http://m1arifles.com/forum/index.php/topic/3377-cant-decide/
http://www.chameleoncamo.com/PATTERNS-MILITARY.html]]> Sun, 18 Nov 2012 20:31:26 +0000 http://m1arifles.com/forum/index.php/topic/3377-cant-decide/ National Match shooting full auto. http://m1arifles.com/forum/index.php/topic/3379-national-match-shooting-full-auto/ Sun, 18 Nov 2012 00:39:52 +0000 http://m1arifles.com/forum/index.php/topic/3379-national-match-shooting-full-auto/ 10 round magazine http://m1arifles.com/forum/index.php/topic/2665-10-round-magazine/ Fri, 16 Nov 2012 23:05:28 +0000 http://m1arifles.com/forum/index.php/topic/2665-10-round-magazine/ Looking for Build Advice http://m1arifles.com/forum/index.php/topic/3352-looking-for-build-advice/
I'm about 8 months shy from getting my EBR MOD 0 stock. Put it on order last week.

I want to do the following upgrades:

22" Medium Heavyweight 1/10turn barrel
New gas cylinder assembly( current one is Untized)
trigger job - was looking at the SEI MAX PAK trigger option
action trued ( have heard of alignment issues on non mil actions)

Wanted the whole action/gas system gone through to make sure no other parts/components need to
be replaced.

I was looking at what options are out there for builders who can do a good build on an M39 EMR Clone. Any comments/recommendations would be greatly appreciated. Thanks in advance.]]> Mon, 12 Nov 2012 16:00:09 +0000 http://m1arifles.com/forum/index.php/topic/3352-looking-for-build-advice/ Thanks for the info http://m1arifles.com/forum/index.php/topic/3368-thanks-for-the-info/
I bought a standard for 1100 bucks on the site, can't wait to shoot it]]> Sun, 04 Nov 2012 07:29:27 +0000 http://m1arifles.com/forum/index.php/topic/3368-thanks-for-the-info/ Can You Close The Bolt On An M1A With Empty Mag Inserted? http://m1arifles.com/forum/index.php/topic/3338-can-you-close-the-bolt-on-an-m1a-with-empty-mag-inserted/
Any assistance would be appreciated.]]> Wed, 31 Oct 2012 19:46:29 +0000 http://m1arifles.com/forum/index.php/topic/3338-can-you-close-the-bolt-on-an-m1a-with-empty-mag-inserted/ Cleaning a New NM M1A http://m1arifles.com/forum/index.php/topic/3364-cleaning-a-new-nm-m1a/ Tue, 30 Oct 2012 20:32:50 +0000 http://m1arifles.com/forum/index.php/topic/3364-cleaning-a-new-nm-m1a/ Suspicious part (Help ) http://m1arifles.com/forum/index.php/topic/3358-suspicious-part-help/   Does anyone have an idea where this would go?]]> Mon, 22 Oct 2012 12:42:33 +0000 http://m1arifles.com/forum/index.php/topic/3358-suspicious-part-help/ M1A range trip http://m1arifles.com/forum/index.php/topic/3331-m1a-range-trip/
I started at 50 yards just to see where she was and she was just a tad low.

At the hundred she was bout right on.

Heres a picture of my last ten round group. LOL nothing to write home about for sure, but it'd get the job done.

Posted Image

I had my bench set up to use my EBR as a spotting scope after my strings.

Posted Image

This is what the clouds looked like as I came back from moving my stand to the hundred. I was hopen it wouldnt rain the two hours I was there

Posted Image

When I finally moved the EBR I only got to really work the action into the chassis. After I switched from the 10 round mag to a "UHC" marked 20 rounder, after 5 or so rounds the rifle started ejecting as it should but the bolt went home on an empty chamber. After about three instances of this, I closed up shop for the afternoon so I can get this little issue cleared up.
I did get the action about seated in the chassis.
The five holes at about 5:30 low were the first string, and the rest are from the following strings to see how the shots moved as the action settled.

Posted Image]]> Fri, 12 Oct 2012 04:25:23 +0000 http://m1arifles.com/forum/index.php/topic/3331-m1a-range-trip/ educate me.... http://m1arifles.com/forum/index.php/topic/3336-educate-me/
Please advise!]]> Wed, 10 Oct 2012 06:58:30 +0000 http://m1arifles.com/forum/index.php/topic/3336-educate-me/ No rifle yet... http://m1arifles.com/forum/index.php/topic/3322-no-rifle-yet/ Fri, 21 Sep 2012 01:01:55 +0000 http://m1arifles.com/forum/index.php/topic/3322-no-rifle-yet/ Aftermarket Parts http://m1arifles.com/forum/index.php/topic/3321-aftermarket-parts/
I saw the video in which one fellow cuts the shim to install it since his muzzle device is welded to the barrel.  I read some comments where others suggest not cutting it if possible and removing whatever is on the muzzle and the front sight to install the shim.  However, doesn't removing and re-installing the front sight introduce the possibility of misaligning the sights?  At the very least, you'd have to re-zero right?

I've also seen a recoil buffer on Midway's sight.  Very mixed reviews on the site, does anyone here have any personal experience with it?]]> Sat, 15 Sep 2012 02:56:20 +0000 http://m1arifles.com/forum/index.php/topic/3321-aftermarket-parts/ M1A standard addons http://m1arifles.com/forum/index.php/topic/3325-m1a-standard-addons/
Posted ImagePosted Image]]> Fri, 14 Sep 2012 21:12:12 +0000 http://m1arifles.com/forum/index.php/topic/3325-m1a-standard-addons/ Who builds custom wood stocks? http://m1arifles.com/forum/index.php/topic/3324-who-builds-custom-wood-stocks/ Fri, 14 Sep 2012 12:39:41 +0000 http://m1arifles.com/forum/index.php/topic/3324-who-builds-custom-wood-stocks/ Problems with LRB receivers? http://m1arifles.com/forum/index.php/topic/3316-problems-with-lrb-receivers/
Thanks for any help you can give me,
Capt. Jeramiah Shastid]]> Fri, 14 Sep 2012 00:14:59 +0000 http://m1arifles.com/forum/index.php/topic/3316-problems-with-lrb-receivers/ Super Match versus National Match http://m1arifles.com/forum/index.php/topic/3276-super-match-versus-national-match/
Anyone used gunbroker or budsguns? Cant anything local so i reckon im going to have to do this online.]]> Tue, 11 Sep 2012 04:27:46 +0000 http://m1arifles.com/forum/index.php/topic/3276-super-match-versus-national-match/ 8 NEW 20 round S.A. Mags for sale http://m1arifles.com/forum/index.php/topic/3318-8-new-20-round-sa-mags-for-sale/
Email:  sryoung45@hotmail.com

Again these are new and the only reason I am having to sell them is because of financial reasons.  Thanks guys.

Steve Young]]> Mon, 10 Sep 2012 23:18:23 +0000 http://m1arifles.com/forum/index.php/topic/3318-8-new-20-round-sa-mags-for-sale/ M1A Battle Rail http://m1arifles.com/forum/index.php/topic/3261-m1a-battle-rail/   Does anyone have any thoughts on this. The part that bothers me the most is the height at which the scope sets atop the receiver . After talking with Troy Industries they say it is the same height as all other scope mounts.
  Has anyone had any experience with this Battle Rail?]]> Sun, 09 Sep 2012 21:30:02 +0000 http://m1arifles.com/forum/index.php/topic/3261-m1a-battle-rail/ M1A Scout Build Parts Wanted http://m1arifles.com/forum/index.php/topic/3308-m1a-scout-build-parts-wanted/ Wed, 05 Sep 2012 06:53:52 +0000 http://m1arifles.com/forum/index.php/topic/3308-m1a-scout-build-parts-wanted/ Cleaning and Maintenance Question http://m1arifles.com/forum/index.php/topic/3226-cleaning-and-maintenance-question/ Greetings everyone! I recently purchased a M1A Loaded after years of wanting to own one. I have read through many articles/forum posts and watched several videos on disassembly, cleaning, and maintenance. However, I still have some questions and I wanted to ask for this forum's expertise.
　
1) Does anyone use grease on the part of the operating rod that goes through the ring underneath the barrel? Or just gun oil?

2) I have read that the gas system should be kept dry to operate properly. Does anyone use any solvents to help clean off the fouling that will dry without leaving behind a coating or residue? I use the Sadlak drills but it can take a while and it is easy to miss a spot.

Thanks for the help everyone!]]> Wed, 05 Sep 2012 04:39:45 +0000 http://m1arifles.com/forum/index.php/topic/3226-cleaning-and-maintenance-question/ M1A Stock http://m1arifles.com/forum/index.php/topic/3306-m1a-stock/ Has anyone tried the Rogue Bull pup stock,by Juggernaut. I Was looking at the concept of it and I could not see anything I would be sacrificing by having it. Let me know. Tue, 04 Sep 2012 03:08:57 +0000 http://m1arifles.com/forum/index.php/topic/3306-m1a-stock/ Norinco m305 http://m1arifles.com/forum/index.php/topic/3303-norinco-m305/ Tue, 04 Sep 2012 03:01:43 +0000 http://m1arifles.com/forum/index.php/topic/3303-norinco-m305/ Range Update 3 http://m1arifles.com/forum/index.php/topic/3284-range-update-3/ Last post I had only shot 150Gr with my M1a Standard and was looking forward to getting some good 168Gr and seeing if I could improve my groups. Finally budgeted for some Federal Gold Medal Nat Match and it was everything I thought it would be. Much better grouping - fist size group of 20 rounds at 100 yards iron sights which I'm sure would be even better but for my need to continue to improve my shooting technique.
At 200 yards I was able to keep 10 rounds all on paper with the medium size target (about 16" x 20"). It's frustrating that my eyesight is having an affect when I shoot at that range. I'll keep working on technique and that should help. I know a scope would help but I just don't want to put a scope on my M1a. I really want to learn to shoot well iron sights even at long range.
A buddy of mine had a get together at his dad's farm and I shot some reloaded Ultramax 168Gr that I got at Cabela's for $84.00 for 100 rounds. I was also pleased with that ammo. Granted we only had 50 yards range, so I need to shoot some more of that ammo at my local range at 100 and 200 yards to really see how it stands up to Federal Gold Medal. Man I really like Federal ammo...I shot some 150Gr plain box Federal that shot noticeably better than any other 150 or 147Gr I tried.
One other thing - on an earlier post I had mentioned a problem with the rear sight elevation slipping one notch after a few shots. I found what was wrong - it was my fault. I had adjusted the sights to get my 100yd zero following most but not all of the instructions. I missed a step at the end. After you loosen, set and then tighten your rear sight you also need to roll it all the way up to full extended position, then tighten again, then roll back down to the spot you have set as zero. I did that last step and have had no more slippage.
Again it's great to be back with you all - looking forward to more M1a talk. What a fine rifle. I was really proud to bring her out at the farm and share.]]> Tue, 04 Sep 2012 02:36:04 +0000 http://m1arifles.com/forum/index.php/topic/3284-range-update-3/ what is best trigger for my m1a http://m1arifles.com/forum/index.php/topic/3302-what-is-best-trigger-for-my-m1a/ I am building a m1a from the ground up. I have a lbr m25 rear lug receiver but no other parts yet. I want the best ( reliability, and action) trigger for this rifle. I have a stock m1a and the trigger is what I expect from a battle rifle. With the new one I want to shoot target and some hunting. I saw an ad From Midway USA @ 308.00 for springfield armory tactical M25-M21 trigger but it said it was discontinued. Why was it discontinued and is there a better or as good trigger from another source? Mon, 03 Sep 2012 01:11:08 +0000 http://m1arifles.com/forum/index.php/topic/3302-what-is-best-trigger-for-my-m1a/ M14 parts http://m1arifles.com/forum/index.php/topic/3300-m14-parts/
    www.sherluk.com]]> Sun, 02 Sep 2012 08:15:57 +0000 http://m1arifles.com/forum/index.php/topic/3300-m14-parts/ Want to trade Socom1 for standard http://m1arifles.com/forum/index.php/topic/3252-want-to-trade-socom1-for-standard/ Sat, 01 Sep 2012 05:27:11 +0000 http://m1arifles.com/forum/index.php/topic/3252-want-to-trade-socom1-for-standard/ <![CDATA[New guy looking for "Victory" red-white-blue laminated stock for M1A.]]> http://m1arifles.com/forum/index.php/topic/3286-new-guy-looking-for-victory-red-white-blue-laminated-stock-for-m1a/ Now I am looking for another.  Anyone got any idea where I could find one?

Much obliged,
Mustang Gregg]]> Fri, 31 Aug 2012 04:26:28 +0000 http://m1arifles.com/forum/index.php/topic/3286-new-guy-looking-for-victory-red-white-blue-laminated-stock-for-m1a/ Midwest M14 light mount http://m1arifles.com/forum/index.php/topic/3257-midwest-m14-light-mount/
http://www.midwestindustriesinc.com/popup.cfm?ignoresite=yes&type=i&id=products/mctm14pu.gif

I was thinking about using it on my Poly, but with the Knights RAS I dont have the space, so I might use it on my standard, or just put it up and use it later.]]> Mon, 27 Aug 2012 14:54:00 +0000 http://m1arifles.com/forum/index.php/topic/3257-midwest-m14-light-mount/ Newbie starting a SOCOM II EBR build http://m1arifles.com/forum/index.php/topic/2967-newbie-starting-a-socom-ii-ebr-build/
Here's a picture of the M14 from Fast Five:
http://www.imfdb.org/w/images/8/8e/Fastfive-pstill-m14.jpg

Thats basically exactly where I want to go with my SOCOM II except I'm keeping my Magpul AFG and maybe going with a different sight.

Here's mine as it is:
http://img339.imageshack.us/img339/6955/imagebbj.jpg

I was hoping to get some of your inputs as to my choice and any recommendations you might have. What will I need to order besides the stock? Are there any other upgrades that I should do before the stock?

If everything seems good to go within the next few days, I'll order the stock and get started.

Thank you!]]> Thu, 23 Aug 2012 20:59:20 +0000 http://m1arifles.com/forum/index.php/topic/2967-newbie-starting-a-socom-ii-ebr-build/ Uses of Break Cleaner http://m1arifles.com/forum/index.php/topic/3245-uses-of-break-cleaner/ Wed, 22 Aug 2012 23:18:24 +0000 http://m1arifles.com/forum/index.php/topic/3245-uses-of-break-cleaner/ Stainless or carbon http://m1arifles.com/forum/index.php/topic/3267-stainless-or-carbon/ Im real close to buy another m1a. One is a loaded carbon barrel. The other is a national match stainless. Any opinions on either? Personally im leaning toward the loaded because of the price. Its around 300 cheaper than NM. Mon, 20 Aug 2012 02:32:51 +0000 http://m1arifles.com/forum/index.php/topic/3267-stainless-or-carbon/ <![CDATA[it's a conspiracy!]]> http://m1arifles.com/forum/index.php/topic/3233-its-a-conspiracy/
Y'all have helped create a monster, here!  I've sold all of my AKs and my lil Ruger M77 compact in 7.63x39...  gonna go all M1A, now!]]> Fri, 10 Aug 2012 16:22:21 +0000 http://m1arifles.com/forum/index.php/topic/3233-its-a-conspiracy/ <![CDATA[Sadlak's mounts in Stock]]> http://m1arifles.com/forum/index.php/topic/3221-sadlaks-mounts-in-stock/ The last due date I saw was 10/04/12... (???)

Paul]]> Thu, 02 Aug 2012 12:24:08 +0000 http://m1arifles.com/forum/index.php/topic/3221-sadlaks-mounts-in-stock/ Suppressor Talk http://m1arifles.com/forum/index.php/topic/3045-suppressor-talk/
I know the ropes as far as paperwork and etc but am curious what will need to be done to a factory M1A Scout Squad in order for it to take a suppressor.  Been shooting a while but never looked into what it would take to suppress a rifle.  

Any input would be appreciated!]]> Thu, 02 Aug 2012 06:52:11 +0000 http://m1arifles.com/forum/index.php/topic/3045-suppressor-talk/ M1A websites http://m1arifles.com/forum/index.php/topic/3164-m1a-websites/


http://www.desertwarriorproducts.com
http://www.thecountryshed.com
http://www.fulton-armory.com
http://www.wholesalehunter.com
http://www.mwgco.com
http://www.gtdist.com
http://www.cheaperthandirt.com]]> Wed, 01 Aug 2012 06:02:56 +0000 http://m1arifles.com/forum/index.php/topic/3164-m1a-websites/ Socom scope mount http://m1arifles.com/forum/index.php/topic/3138-socom-scope-mount/ Wed, 01 Aug 2012 05:40:06 +0000 http://m1arifles.com/forum/index.php/topic/3138-socom-scope-mount/ Hunting with your M1A... http://m1arifles.com/forum/index.php/topic/3133-hunting-with-your-m1a/ If you have hunted with your M1A:  What's the farthest distance you dropped an animal?  How was the accuracy?  Did you find it to be too heavy to lug around the woods?  Got any pics from the Hunts?]]> Mon, 30 Jul 2012 02:16:07 +0000 http://m1arifles.com/forum/index.php/topic/3133-hunting-with-your-m1a/ Damn this M1a is sweet http://m1arifles.com/forum/index.php/topic/3210-damn-this-m1a-is-sweet/ Used a 50 yard lane. 9 round and it was zeroed. Ate out the center bulleyes!!!

I'm waiting for delivery of more ammo, next 100 and 200 yards.

If you see Armscor ammo at a good price don't hestiate to use it. Nice brass not dents or dings and shoots really clean.]]> Wed, 25 Jul 2012 04:46:13 +0000 http://m1arifles.com/forum/index.php/topic/3210-damn-this-m1a-is-sweet/ scout effective range http://m1arifles.com/forum/index.php/topic/3199-scout-effective-range/ Tue, 24 Jul 2012 05:48:22 +0000 http://m1arifles.com/forum/index.php/topic/3199-scout-effective-range/ Ammo Source http://m1arifles.com/forum/index.php/topic/3204-ammo-source/ http://ammoseek.com/


Take a look and see what you think.

Good shooting to all.

Clark]]> Mon, 23 Jul 2012 00:15:00 +0000 http://m1arifles.com/forum/index.php/topic/3204-ammo-source/ Scout Impressions http://m1arifles.com/forum/index.php/topic/3200-scout-impressions/

Anyway looking it over I thought the op rod was rather something. It barely clears the track hitting the windage knob. Doesn't seem that close on mine with a USGI op-rod. No time to inspect it really close.

Also there is rubbing. The op rod hits the scout rail mount. It also drags on the barrel. Plus it is dragging on the stock. Fit...there is none. Speaking of stocks, what a POS they are. Front band is normally loose, so the gas cylinder key isn't timed. The safety bridge on the receiver looked to be working about right, so that is good. The rest of the receiver, who knows. It might be okay, but without careful measuring I wouldn't know. Trigger wasn't half bad. Better than I remember them being. I guess one can get lucky from time to time.

Accuracy, well that seemed okay. Isn't a M21, but by good it wasn't bad. Another thing I did for him. Spot and adjust his sights.

All and all, I'm not buying a scout from SAI. I'll build one from scratch. Too many things just not right. Make it better to begin with instead of chasing all the inconsistencies.

Best thing for a scout owner to do, ditch the scout rail, ditch the cheap stock if it is the fiberglass one and drop it in something better. Also ditch that thingy on the end. What an ugly ass thing that brake is. Time the gas cylinder. USGI or equivalent commercial parts as needed. And add the commonly needed drop in parts.]]> Sun, 22 Jul 2012 05:53:44 +0000 http://m1arifles.com/forum/index.php/topic/3200-scout-impressions/ SOCOM 16 front sling hoop options.... http://m1arifles.com/forum/index.php/topic/3180-socom-16-front-sling-hoop-options/ iking 2 point tactical sling on my SOCOM 16.... but it needs a side mount option for the front of the rifle. I noticed that Midwest Industries makes a light mount listed at the following link: http://www.midwestindustriesinc.com/index.cfm?fuseaction=category.display&category_id=168
but I think this would add considerable bulk, weight, and may be a bit too far forward for a sling.

What do you guys suggest?]]> Fri, 13 Jul 2012 03:08:10 +0000 http://m1arifles.com/forum/index.php/topic/3180-socom-16-front-sling-hoop-options/ Sadlak TiN coated gas piston review http://m1arifles.com/forum/index.php/topic/3048-sadlak-tin-coated-gas-piston-review/ I have to say, I am more than pleased with the results. It did in fact improve the accuracy of my rifle. I will admit that part of it was luck probably in recieveing a piston that my rifle liked. But I believe it was also due to the fact that Sadlak has a really good design and that they also do excellent workmanship. I can not attest to the pistons made by SEI, but I think they would be hard pressed to offer a better piston than the Sadlak. I would buy another Sadlak TiN piston in a heartbeat. I highly recommend it.]]> Wed, 11 Jul 2012 22:01:57 +0000 http://m1arifles.com/forum/index.php/topic/3048-sadlak-tin-coated-gas-piston-review/ SAI M1A True Caliber: 7.62 or .308? http://m1arifles.com/forum/index.php/topic/3165-sai-m1a-true-caliber-762-or-308/ What is the true/actual caliber of the Springfield Armory M1A Standard?

The SAI website states "7.62 x 51mm NATO (.308 WIN)" which suggests that 7.62 is my answer. However, I believe SAI stopped stamping "7.62MM" on the receiver heels. Nearly 50% of all other internet references to the M1A (not M14) is .308. I've tried researching my answer on this forum and have not found a conclusive answer.

My SAI M1A Standard has SN 242XXX if that makes any difference.

I'm new to the M1A world and rifles in general. So, if you would, please confirm my understanding:

* generally, it is safe to shoot 7.62 in a .308 rifle
* generally, it is unsafe to shoot a hot-loaded .308 in a 7.62 rifle -- this of course begs the question, what is "too hot" and how can you tell when purchasing the ammo?
* milsurp 7.62 should be fine within my aforementioned M1A? If not, why not? What should I look out for -- hot loads?
* now that SAI is a commercial company (as opposed to the original Armory in Springfield, MA), is the M1A considered a commercial rifle or is it still considered a milsurp rifle.

This isn't a "7.62 vs .308" question.  If my M1A is actually 7.62, I just want to be sure I select my .308 purchases carefully.  If it's actually .308, I guess I won't care what I feed it.  ;)]]> Wed, 11 Jul 2012 01:29:53 +0000 http://m1arifles.com/forum/index.php/topic/3165-sai-m1a-true-caliber-762-or-308/ M1A Socom II http://m1arifles.com/forum/index.php/topic/3163-m1a-socom-ii/
Thank you

Nick]]> Thu, 05 Jul 2012 20:35:05 +0000 http://m1arifles.com/forum/index.php/topic/3163-m1a-socom-ii/ Standard Ideas http://m1arifles.com/forum/index.php/topic/3148-standard-ideas/
So I was thinking about my new Standard M1A I recently got and thought I would put the modification ideas on here.

-USGI Flash suppressor-Already done(might have it reamed to NM spec)
-Sadlak NM spring guide-will get one eventually
-NM Leather 1907 Sling
-USGI or equivalent cleaning kit for the stock(for the weight and as a last resort it'll be there)
-USGI M14 or PB extractor(might even look into one of the extra Garand extractors I have)
-NM Rear sight (will explain below)
-Cheek pad-the one that used to reside on my PBR
-Camo

All SA Inc receivers, starting in the early 2000's, have this modification. Its called the Air Force mod, since they came up with it in the 70's to match condition their Garands. The rear sight "ear" for the windage knob has a hole drilled in it at its base (roll your receiver over on its side and look at the area under the knob, doesnt matter the model, standard, loaded, NM. The latter two have a spring loaded pin under the knob that cuts the windage adjustments of thhe standard knob in half, the standard  will have the hole but no spring or pin) for a spring loaded pin, its actually an extractor spring and plunger. The spring is shortened to fit the hole and the plunger clicks into the modified windage knob. Its simple and it works using modified standard parts.

Since I guess all M1A's come with the NM front sight, I figured why not add them to my standard? I'll add an un-hooded NM apeture from my stash, and put the modded windage knob and plunger assembly on my rifle and have the more-or-less fine adjustments of a NM rear on my standard rifle.

http://www.springfie...products_id=159

Okay there you go. Lemme know what you think]]> Mon, 02 Jul 2012 20:47:22 +0000 http://m1arifles.com/forum/index.php/topic/3148-standard-ideas/ Adjustable gas piston operation http://m1arifles.com/forum/index.php/topic/3071-adjustable-gas-piston-operation/ Is it possible to modify the M1a gas piston system to allow single shot action such as with the LWRC REPR? Mon, 02 Jul 2012 13:15:27 +0000 http://m1arifles.com/forum/index.php/topic/3071-adjustable-gas-piston-operation/ M1A Cheap Ammo Reviews http://m1arifles.com/forum/index.php/topic/3146-m1a-cheap-ammo-reviews/ Mon, 02 Jul 2012 06:47:53 +0000 http://m1arifles.com/forum/index.php/topic/3146-m1a-cheap-ammo-reviews/ Ammo shortage?? http://m1arifles.com/forum/index.php/topic/3021-ammo-shortage/
I check the links on RIFLE-COMPANY.COM every week or so and even the links that say they have the inexpensive ammo, generally don't.

Would like to hear other's thoughts on this. Thanks.

Clark]]> Sun, 01 Jul 2012 21:00:59 +0000 http://m1arifles.com/forum/index.php/topic/3021-ammo-shortage/ Small JP muzzle brake/Delta P adaptor combo http://m1arifles.com/forum/index.php/topic/3010-small-jp-muzzle-brakedelta-p-adaptor-combo/ Sat, 30 Jun 2012 20:13:24 +0000 http://m1arifles.com/forum/index.php/topic/3010-small-jp-muzzle-brakedelta-p-adaptor-combo/ <![CDATA[m14 brian's Socom II]]> http://m1arifles.com/forum/index.php/topic/3024-m14-brians-socom-ii/ Posted ImagePosted ImagePosted ImagePosted ImagePosted Image]]> Thu, 28 Jun 2012 17:49:51 +0000 http://m1arifles.com/forum/index.php/topic/3024-m14-brians-socom-ii/ Just Got My First Scout Squad....Seeking Suggestions regarding upgrades, slings, etc. http://m1arifles.com/forum/index.php/topic/1955-just-got-my-first-scout-squadseeking-suggestions-regarding-upgrades-slings-etc/ Thu, 28 Jun 2012 02:07:30 +0000 http://m1arifles.com/forum/index.php/topic/1955-just-got-my-first-scout-squadseeking-suggestions-regarding-upgrades-slings-etc/ Op rod spring guide - Sadlak vs Badger Ordnance http://m1arifles.com/forum/index.php/topic/3135-op-rod-spring-guide-sadlak-vs-badger-ordnance/ Thu, 28 Jun 2012 01:18:09 +0000 http://m1arifles.com/forum/index.php/topic/3135-op-rod-spring-guide-sadlak-vs-badger-ordnance/ Cleaning and Maintence of M1A http://m1arifles.com/forum/index.php/topic/3142-cleaning-and-maintence-of-m1a/
It seems that a lot on new members have questions about cleaning their rifle.  I've read all the previous post on this subject and they have been very helpful.  However, I am a visual learner,  I recently purchased a video that was very helpful.  The video was narated by Art Lupino, a competive shooter and gunsmith who builds and services competition M1A/M-14 rifles( at least he was doing this in 1992)

Since it was produced in 1992 some may feel it's "dated" but since I was orginally trained on the M-14 in 1963 it didn't seem that "dated" to me.

The video can be obtained from the following websitewww.GunVideo.com.

Hope this is helpful for the "new guys"]]> Sun, 24 Jun 2012 15:55:39 +0000 http://m1arifles.com/forum/index.php/topic/3142-cleaning-and-maintence-of-m1a/ M1A Trigger work http://m1arifles.com/forum/index.php/topic/3011-m1a-trigger-work/
My M1A breaks reasonably crisp at 6 pounds... not good enough, I want it CMP legal at ~4.6 lbs.

So to my issue. I need decent disassembly help, I can do the rest. If for some reason I can't get an acceptable
trigger with stock parts, what are my options?]]> Sun, 24 Jun 2012 08:44:31 +0000 http://m1arifles.com/forum/index.php/topic/3011-m1a-trigger-work/ M1A project at gunshow http://m1arifles.com/forum/index.php/topic/3128-m1a-project-at-gunshow/
It didn't have an op-rod steel stock liner, or receiver. I thought it was priced high... opinions?]]> Sun, 17 Jun 2012 06:51:41 +0000 http://m1arifles.com/forum/index.php/topic/3128-m1a-project-at-gunshow/ Not sure!? http://m1arifles.com/forum/index.php/topic/3119-not-sure/
http://www.midwestindustriesinc.com/index.cfm?fuseaction=category.display&category_ID=179]]> Wed, 13 Jun 2012 04:42:04 +0000 http://m1arifles.com/forum/index.php/topic/3119-not-sure/ Ammo issues (I hope!) http://m1arifles.com/forum/index.php/topic/3113-ammo-issues-i-hope/
I fired this same ammo 2 weeks ago without any problems. I cleaned the gas cylinder components afer going to the range last time so I don't think cleanliness is an issue. I didn't have any other ammo with me to see if there was a problem with the rifle.

The ammo was purchased from Samco Global and is advertised as being made in Portugal circa 1982-83.

Photo is attached and while you are looking at the photo, please note the approximate 1/8th to 3/16th's inch "scrape" just above the F on the cartridge. There is also a small scrape just above and touching the circle and cross. I get these on every round fired regardless of manufacturer. Is this an issue I need to be concerned about or is this more or less normal?

I'm not dissing the supplier here, like I said, 2 weeks ago this stuff shot fine.

Thanks in advance for any information.

ClarkIMG_1413.JPG ]]> Wed, 13 Jun 2012 04:16:43 +0000 http://m1arifles.com/forum/index.php/topic/3113-ammo-issues-i-hope/ USGI Fire control group (FCG) http://m1arifles.com/forum/index.php/topic/3107-usgi-fire-control-group-fcg/
Now I had a thought, if I had TWO FCG's I could make one CMP legal at 4.5 lbs, the other lighter for target shooting. Good so far.

Problem: Try finding an intact FCG. Well after a L-O-N-G search, I found one on EBAY and bid stupid money on it and having more money than sense I won it. Stil no problem?

I don't know the nomenclature for the individual little cuts of the parts but the trigger part that latches on the back of the hammer to prevent full auto is a LOT wider for what appears to be a selector engagement mechanism. Question, are these parts contraband without the selector switch? If so I'll  just cut off the appendage and be done with it.]]> Mon, 11 Jun 2012 05:01:44 +0000 http://m1arifles.com/forum/index.php/topic/3107-usgi-fire-control-group-fcg/ Adding on parts (FYI) http://m1arifles.com/forum/index.php/topic/3108-adding-on-parts-fyi/
This is a pain if I'm looking to buy something because once the "bling" is added most people throw or give away the original parts, or when they trade it in, give the old parts to a dealer who throws it in a bin to be sold piecemeal.

For me, I seem to see a product the way the designer did, and like its aesthetics for what they are, so if I find something I want, I'll DEDUCT from the asking price in order to put the item back the way it was if the original parts are not available.

A few years ago I found a motorcycle I wanted which had a LOT of BS on it that I didn't want. I made a really low offer because he did not have the original parts and the guy refused my offer. A week later he almost tearfully called me and told me I could have the bike for my offer price telling me that I "probably was screwing him and was going to keep the bike as it was"

It took me several months to get all of the stuff the bike was missing, but it was worth it.

Now, I'm NOT criticizing  anyone who blings up stuff, BUT this is a bit of advice, NEVER separate the original parts from whatever you dress up, not EVERYONE sees what is "dressed up" the same way.]]> Mon, 11 Jun 2012 04:11:25 +0000 http://m1arifles.com/forum/index.php/topic/3108-adding-on-parts-fyi/ Building an M1A http://m1arifles.com/forum/index.php/topic/3112-building-an-m1a/ Mon, 11 Jun 2012 03:41:46 +0000 http://m1arifles.com/forum/index.php/topic/3112-building-an-m1a/ American Eagle Ammo http://m1arifles.com/forum/index.php/topic/3102-american-eagle-ammo/ Thanks,
j]]> Sun, 10 Jun 2012 04:06:21 +0000 http://m1arifles.com/forum/index.php/topic/3102-american-eagle-ammo/ EBR Mod 1 build coming together http://m1arifles.com/forum/index.php/topic/2906-ebr-mod-1-build-coming-together/ I decided that since I was on vacation and the range is closed, much to my consternation, that I would let you guys know about where my Loaded Standard EBR build is and some of things I’ve thought about as to its final configuration.
First let me list what I’ve already done to the base rifle itself.
I’ve changed out the bolt (Winchester), trigger group & operating rod ( Springfield Armory/CMP parts), a Fulton Armory NM flash suppressor, Sadlak NM spring guide and TiN coated gas piston. I replaced the original SA Inc. oversized Walnut stock with another SA Inc part, one of the old modified USGI composite stocks with the selector cuts filled in.
Posted Image
Posted Image
As you can see in the pictures, it has the Sadlak scope mount I used to have installed, I’ve since sold the mount and re-installed the charger guide.
As for the stock itself, it should be here by Saturday, I hope. I guess I got lucky to the Mod 1, though I would kill for Mod 0, even just the rear end, but I’ll make this one work. Mine has an M4 style collapsible stock on it, nut I’m trying to decide between a Magpul CTR or a Crane SOPMOD since I don’t have one of them. And from prior experience, I’ll try the Tango Down Battlegrip the chassis comes with, but I’ll most likely replace it with a MIAD from Magpul. It just lends itself to more consistent trigger finger placement.
Posted Image
Posted Image
Posted Image
Posted Image
As for the other parts, I was looking for a SAGE DCSB and was having NO luck at all finding it, or the LaRue counterpart. So I got on the waiting list at US Tactical, 60 to 90 days minimum as of today. In a change of fortune, I found the SAGE part on the Firing Line forum for less than a new one and shipping was included in the price, so I snapped it up and it should be here next week sometime.
So now I’m looking at optics packages for the finished product. But since I can’t do anything but use iron sights until I decide this is just something to keep my mind busy.
Here goes with the options I’ve been looking at:
1-The EBR RI set up, Leupold rings and a 3.5-10X40 TMR or Mil-dot, 30mm tube
2-Same rings as the RI, but a Vortex Viper 2.5-10X44 with a 30mm tube
Here are links to both scopes
http://swfa.com/Vortex-25-10x44-Viper-PST-30mm-Rifle-Scope-P44567.aspx
http://swfa.com/Leupold-45-14x50-Mark-4-ERT-30mm-Riflescope-P12763.aspx
This is where I’m at and since I have so much time on my hands, lol, I thought I’d post here for you guys to read what I’m thinking about. ]]> Sun, 10 Jun 2012 03:40:18 +0000 http://m1arifles.com/forum/index.php/topic/2906-ebr-mod-1-build-coming-together/ Unfired M1A Loaded, does my receiver look off center in the stock? http://m1arifles.com/forum/index.php/topic/2985-unfired-m1a-loaded-does-my-receiver-look-off-center-in-the-stock/
Thanks in advance...


https://plus.google.com/photos/113921810479784607961/albums/5734252313343453249?authkey=COyqoOq3_ozIuAE]]> Thu, 31 May 2012 02:44:52 +0000 http://m1arifles.com/forum/index.php/topic/2985-unfired-m1a-loaded-does-my-receiver-look-off-center-in-the-stock/ Vented gas plug http://m1arifles.com/forum/index.php/topic/3085-vented-gas-plug/
I joined up here a month or so ago, just after I got my Springfield Scout Squad. Posted on a few threads, thought a lot about what I had read around here, and on the advice of another member I purchased a vented gas plug off Midway. This one:

http://www.midwayusa...teel-parkerized

I guess it's OK, haven't used it yet, I just screwed it in there after cleaning the rifle last weekend. Noticed something I had not counted on. It screws down in the gas cylinder a little bit farther than the stock plug. That worries me. I found a shim kit on Fulton Armory's web site and bought it so I can get the plug in there at just the right depth.

My question is, how do I decide which shim to use? The hole in the piston has to align with the hole in the cylinder but I'm not sure if I can eyeball it or if I should use a gauge of some sort.

What say ye riflemen?

I knew things would start getting weird as I began to tweak this beast, but I love the rifle and will continue to put some personalizations on it. Just wanna make sure they are the right ones ;)]]> Thu, 31 May 2012 02:14:10 +0000 http://m1arifles.com/forum/index.php/topic/3085-vented-gas-plug/ Leatherwood Scope http://m1arifles.com/forum/index.php/topic/3082-leatherwood-scope/ Tue, 29 May 2012 01:09:36 +0000 http://m1arifles.com/forum/index.php/topic/3082-leatherwood-scope/ Removing operating rod http://m1arifles.com/forum/index.php/topic/3068-removing-operating-rod/ Mon, 28 May 2012 17:58:03 +0000 http://m1arifles.com/forum/index.php/topic/3068-removing-operating-rod/ Next up for my M1A http://m1arifles.com/forum/index.php/topic/3060-next-up-for-my-m1a/ Replaced the op spring with a Tubbs spring.
Shimmed the gas cylinder.
Replaced the gas piston with a Sadlak TiN.
Complete a trigger job.
Everything I've done so far has made improvements in accuracy and performance. I'm very pleased thus far.
The next thing I want to do is get a steel bedding kit and skim bed the reciever. I would like a good tight fit, similar to what my Garand has.
Secondly, I want a oversize mag release. I'm not that fond of the twig SA has installed on it.
]]> Mon, 28 May 2012 16:39:37 +0000 http://m1arifles.com/forum/index.php/topic/3060-next-up-for-my-m1a/ ProMag http://m1arifles.com/forum/index.php/topic/2805-promag/ I bought the mag for a reasonable price, I do not remember how much it was though. Lol. I wouldn't spend much money for a curiosity satisfaction.
First off the mag is well constructed. I have heard both good and bad about these ProMag magazines. Most of it was good, this is why I wanted to try one.
The mag loaded smoothly. I unloaded and reloaded it several times before taking it to the range for the first time last weekend.
I loaded the mag 5 times to full capacity, for a total of 100 rounds fired. To my surprise, this magazine functioned flawlessly. I didn't have even the slightest hiccup.
For the price of CMI mags at 44mag.com, I won't be switching brands. But in a pinch and a ProMag is available and a CMI is not, I would recommend the Promag. Of course only time will tell as to how long of a life span this mag will have, but for sure in the short term, it's good to go.
This might give you guys options, if needed, for future mag options.]]> Mon, 28 May 2012 07:15:53 +0000 http://m1arifles.com/forum/index.php/topic/2805-promag/ Whats been your experience with American Eagle .308 150gr ammo? http://m1arifles.com/forum/index.php/topic/3063-whats-been-your-experience-with-american-eagle-308-150gr-ammo/ Sat, 26 May 2012 04:55:53 +0000 http://m1arifles.com/forum/index.php/topic/3063-whats-been-your-experience-with-american-eagle-308-150gr-ammo/ Gas Cylinder Plug comes loose after about 30 rounds http://m1arifles.com/forum/index.php/topic/3046-gas-cylinder-plug-comes-loose-after-about-30-rounds/
Has anyone else had this problem?  The M1A manual is not specific about how much force is needed to properly tighten the plug.]]> Sat, 19 May 2012 15:35:29 +0000 http://m1arifles.com/forum/index.php/topic/3046-gas-cylinder-plug-comes-loose-after-about-30-rounds/ suppressed m1a socom 2? http://m1arifles.com/forum/index.php/topic/3034-suppressed-m1a-socom-2/ would it crazy to setup a suppressed m1a or even worthwhile? Fri, 18 May 2012 07:00:45 +0000 http://m1arifles.com/forum/index.php/topic/3034-suppressed-m1a-socom-2/ What do I really have? Is it more than meets the eye? http://m1arifles.com/forum/index.php/topic/3014-what-do-i-really-have-is-it-more-than-meets-the-eye/
I just snagged a "used" M1a from a local shop. They told me of picking it up at an estate sale. From the looks of it, it was definitely fired, at least for proofing, however the complete absence of any visible wear marks, soot around the gas system, fully intact parkerizing in the Op rod channel, on all the bolt surfaces and the contact surfaces inside the receiver, suggest it may have been ONLY proof fired. It certainly hasn't been broken in.

Here's what I do know. Please school me on anything you might add. It's my first M1a and my experience is very limited with a Polytech M14.

It has a fiberglass stock with rubber recoil pad, originally a brown color, now painted black with a wrinkle finish. Based on stock wear far beyond that on the metal parts, I suspect it was a surplus stock that was repainted in it's former life, somewhat battered along the way. I wonder if it was supplied from Springfield Armory in this state, or if it joined the rifle after delivery. The stock appears to have been filled on the right side where the selector notch would have been. There is a small amount of glass bedding in the areas around the trigger group and the magazine well. The action fit is tight and the firing mechanism locks up very tightly when latched. Looking at the fit of the receiver before installing the firing mechanism, it's clear that the bedding was done when these two came together. I just have no clue if it was at the factory or after.

The hand guard is new, either plastic or fiberglass, but appears that it was painted at the same time as the stock in the same black wrinkle finish.

Sights appear to be standard M1A type with a typical winged front post and the non-hooded rear apeture.

The receiver is marked "US Rifle M1A - Springfield Armory" with a serial number of 086xxx. I found that serial number associated with a post-ban date of manufacture around Jan 1995. That is consistent with the lack of "7.62" caliber marking on the receiver as well as the absence of a bayonet lug on the flash suppressor.

The barrel is marked TRW and appears to be date coded to December 1963 or 1983. It's hard to make out. The number on the barrel is 7790190 with a BP. I don't believe the bore is chrome lined, but it is pristine and bright.

The bolt is a TRW marked 7790186 with a ZJ.

I presume the operting Rod is a TRW also, with a number of 7267064 and 66118.

The firing mechanism is marked with 7267030 SA with the hammer marked 646008-2 SA.

It seems I have a 17 year old rifle that spent it's whole life in a gun safe somewhere. I was surprised to find all these TRW parts after reading that most had dried up by the time this rifle would have been built in 1995.

So what exactly do I have here? I beat the cost of a new Loaded M1A by several hundred bucks, so I feel sure I did well, but would love to know more. Thanks!]]> Thu, 10 May 2012 06:22:21 +0000 http://m1arifles.com/forum/index.php/topic/3014-what-do-i-really-have-is-it-more-than-meets-the-eye/ Scope mounting frustrations... http://m1arifles.com/forum/index.php/topic/2982-scope-mounting-frustrations/ So, let me start at the beginning.

A long time ago, in a galaxy far, far away...

My wife bought me an M1A Loaded for our 10 year anniversary. For optics and rings, I purchased a Vortex Viper PST 6-24x50 FFP and a set of Leupold Mark 4 super high rings. It took a couple of weeks before I was able to get to the range to sight this in, but once I did, I had major issues.

I started off at 50 yards to get on paper. However, I had to move the windage all the way to the right to get it centered on the target. I literally ran out of adjustments. At 50 yards. Yeah, I had a feeling something was wrong. So, I emailed Vortex and voiced my displeasure. After I hit "Send," I started about what might have gone wrong. Then I realized it might actually be my fault. Posted Image

One of the features of the Viper PST is their CRS Zero Stop ability - you basically use shims once you have it zeroed so you have the ability to go back to zero if you make adjustments. Well, I remembered I removed the turret caps, and, like an idiot, I twisted the turrets. Without the caps on. When I replaced the turret caps, obviously it was now way out of whack. I know, I know...what an idiot. I then emailed Vortex back, apologized, and explained what I did and it was my fault. The customer service rep at Vortex told me to send the scope back so one of their riflescope techs could reset it back to factory specs. Will do, good sir! The turnaround time was literally 4 days. Awesome service.

I got the scope back and went back to the range to sight it in. Much better this time; however, something's still wrong. My first couple of shots were high and to the right. So, I made the necessary elevation and windage adjustments and got it shooting perfect in about 6 shots. Everything seemed awesome! However, I noticed the reticle was still "off to the right" in the scope a bit too much. I emailed Vortex again, explained the situation, and they ended up calling me this morning to troubleshoot. I explained to him what rings and gun this was going on, and when I did, he shouted "aha!" He said this issue is common with M1As that have the Vltor cluster rail. He said I need to align the dovetail/stripper clip guide at the rear of the rail, in front of the rear site.

So, my three questions are...

1. Does this make sense what he's saying?
2. How to align the dovetail?
3. Would I be better off taking it to a gunsmith?

Any help you guys can provide would be greatly appreciated.


Posted Image




As you can see, it doesn't seem to aligned perfectly and is offset to the right. Does that make any difference?


Posted Image



Posted Image]]> Wed, 09 May 2012 08:06:30 +0000 http://m1arifles.com/forum/index.php/topic/2982-scope-mounting-frustrations/ Socom 16 Parts http://m1arifles.com/forum/index.php/topic/3016-socom-16-parts/ - aside from the barrel...

Thanks,

FiremanBill]]> Sun, 06 May 2012 09:03:28 +0000 http://m1arifles.com/forum/index.php/topic/3016-socom-16-parts/ Oops.Do I have a problem? http://m1arifles.com/forum/index.php/topic/3019-oopsdo-i-have-a-problem/ Sun, 06 May 2012 08:35:37 +0000 http://m1arifles.com/forum/index.php/topic/3019-oopsdo-i-have-a-problem/ What Kind of Accuracy, Long Range? http://m1arifles.com/forum/index.php/topic/2881-what-kind-of-accuracy-long-range/
My big question now is, with a good quality scope WHAT KIND OF ACCURACY can I expect?
Anyone with knowledge please respond
Should I get a scope?
]]> Sat, 05 May 2012 05:21:49 +0000 http://m1arifles.com/forum/index.php/topic/2881-what-kind-of-accuracy-long-range/ Sadlak NM spring guide http://m1arifles.com/forum/index.php/topic/3002-sadlak-nm-spring-guide/ Sun, 29 Apr 2012 04:07:23 +0000 http://m1arifles.com/forum/index.php/topic/3002-sadlak-nm-spring-guide/ Cleaning supplies needed for M1A http://m1arifles.com/forum/index.php/topic/2889-cleaning-supplies-needed-for-m1a/ Sat, 28 Apr 2012 01:03:28 +0000 http://m1arifles.com/forum/index.php/topic/2889-cleaning-supplies-needed-for-m1a/ Might be a silly question... http://m1arifles.com/forum/index.php/topic/2997-might-be-a-silly-question/ I just got my M1A this week and am getting familiar with it, one thing I noticed tonight is a hole (appears to be threaded) on the forward portion of the left side of the receiver/bolt asembly. I looked through my manuals and dont see this labled. What is this for? I apologize in advance if this is something simple I am overlooking. Fri, 27 Apr 2012 08:10:16 +0000 http://m1arifles.com/forum/index.php/topic/2997-might-be-a-silly-question/ Got My New SA M1A http://m1arifles.com/forum/index.php/topic/2969-got-my-new-sa-m1a/ Endured the Calif. wait period and now have my rifle. Have not shot it yet (too darn busy of late) and that brings up a minor question. It's chambered in .308 and I fired a friends M1A with that ammo which got me hooked in the first place...... I loved it ! But somewhere I read that Springfield Armory recommends using 7.62X51 NATO in the rifle instead of 'civilian' .308 Win. I'd just like some clarification on this as it sounds like a milder version of the 5.56 NATO versus .223 debate that rages on today. From what I've learned about that is it isn't so much the cartridge pressures as a difference in the chamber design and that a 5.56 fired in a civilian rifle setup for .223 can be problematic or dangerous. So shoot .308 and I'm good to go ?     Thanks. :huh:]]> Wed, 25 Apr 2012 03:32:09 +0000 http://m1arifles.com/forum/index.php/topic/2969-got-my-new-sa-m1a/ Has anyone ever stripped a M1A... http://m1arifles.com/forum/index.php/topic/2988-has-anyone-ever-stripped-a-m1a/ Tue, 24 Apr 2012 03:16:51 +0000 http://m1arifles.com/forum/index.php/topic/2988-has-anyone-ever-stripped-a-m1a/ Is Portuguese Surplus ammo safe in my M1A? http://m1arifles.com/forum/index.php/topic/2978-is-portuguese-surplus-ammo-safe-in-my-m1a/
Thanks in advance...]]> Fri, 20 Apr 2012 09:46:55 +0000 http://m1arifles.com/forum/index.php/topic/2978-is-portuguese-surplus-ammo-safe-in-my-m1a/ Scratching Right Side of Magazine http://m1arifles.com/forum/index.php/topic/2965-scratching-right-side-of-magazine/
If you look at the attached Pictures... you will notice the Receiver Alignment seems off. The issue is easy to see.  Everything functions correctly except The magazine is getting worn to the bare Metal.

I know I can call Springfield and send it away for 30+ days for them to fix but I would like to examine all my choices. Anyone know if Springfield will pay all costs including shipping and any dealer fees?
I am hoping someone might have an easy solution or recommendation?

http://s811.photobuc...nt=IMG_5337.jpg]]> Wed, 18 Apr 2012 20:12:17 +0000 http://m1arifles.com/forum/index.php/topic/2965-scratching-right-side-of-magazine/ Nuetered flash supressor? http://m1arifles.com/forum/index.php/topic/2964-nuetered-flash-supressor/ Tue, 17 Apr 2012 13:46:12 +0000 http://m1arifles.com/forum/index.php/topic/2964-nuetered-flash-supressor/ 20 round GI mags? http://m1arifles.com/forum/index.php/topic/2928-20-round-gi-mags/ I have a need for 6 20 round GI issue mags. Does anyone have a source? Mon, 16 Apr 2012 23:46:33 +0000 http://m1arifles.com/forum/index.php/topic/2928-20-round-gi-mags/ <![CDATA[Practicality of "Extra" capacity magazines]]> http://m1arifles.com/forum/index.php/topic/2945-practicality-of-extra-capacity-magazines/
I guess everybody's noticed the 25 and 50 round magazies for the M14 lately. And I like to get trigger happy on ocassion just like I'm everybody else does.  But I got to thinking about the real practicality of them.

The standard magazine (for those of us in relatively free America) is the old standby 20 rounder. I know I havent ever had my rifle(s) monopod on the magazine when I was proned out with it. And from the looks of the 25 round magazine youre gonna monopod unless you have the arms of a praying mantis or a long bi-pod. And and the high bi-pod doesnt seem so great in practice. Not to mention the ever present weight addition to the rifle itself and to you if youre carrying more than one. (when I find a scale I'll do a weight of the gear post on this)

Now I'm just thinking out-loud on this so dont take my observations as Gospel.

Next we have the new 50 round and to lesser extent the 100 round BETA-C magazine. I've not laid hands on either for the 14 but had one for for the AR(BETA Mag). In the case of the AR the C mag added ALOT mass to the rifle. Even on a basic M4 style AR it turned the rifle into a static defense weapon. (in a SHTF situation I'm sure the weight wouldnt be as noticeable), Also it pretty much deadened the recoil of the rifle too, and by deadened I mean there was NO recoil and follow-up shots were just as simple as re-squeezing the trigger.

I wanted to try the C mag in an A2 on burst but never got the chance, just to see how the A2 would handle it.

I'm not trying to stear this post toward the dreaded "SHTF" scenario, but honestly, would you want to hump eight 25 rounders, plus 1 in the rifle, or 50 or 100 drum?

I'd be just as happy only returning fire if I had to, and making my shots count, than having a ton of ammo weight to high tail it with and just sprayin to make somebody duck.

Anyway , I hope I made some sense in this post. Its something to think about anyway.]]> Mon, 16 Apr 2012 23:15:18 +0000 http://m1arifles.com/forum/index.php/topic/2945-practicality-of-extra-capacity-magazines/ updated information on recent purchase http://m1arifles.com/forum/index.php/topic/2949-updated-information-on-recent-purchase/ Sun, 15 Apr 2012 03:38:33 +0000 http://m1arifles.com/forum/index.php/topic/2949-updated-information-on-recent-purchase/ Sprung for a New Springfield http://m1arifles.com/forum/index.php/topic/2894-sprung-for-a-new-springfield/ One in a synthetic stock sportin a Kali muzzle brake, the other wearing a nice walnut stock and a neutered flash surpressor. Both are standard models and both were priced at 1249.00.
So I kept looking, they had a put together Colt AR-15 Delta type rifle, the lower was a later model Colt with the standard take down pins nd the upper was an SP1 fixed carry handle with the BIG front take down hole.......so long story short it was all Colt but badly built over priced. And they had a basic black ACR. It was also expensive, used it was 1600 dollars. I looked at it and it could definetly be a fun rifle. Though I dont like the MAGPUL BUIS. It shouldered nicely and fit well, but too much coin and I have AR's.
Then I got to thinkin, and went back to the two M1A's. The Kali rifles bolt had a some noticeable slop in it when I dropped the magazine and pushed it forward and back while it was in battery, so that one was definetly OUT.
I decided on the walnut stocked one after giving it a good going over. I put a deposit and will hopefully have her home in the next week or two.

I think at the least I'll switch out the neutered flash suppressor with a spare GI one I have squirreled away and put a NM spring guide in it. At most I'll buy a USGI trigger group which isnt cheap anymore. But the flash suppressor will definetly be replaced.]]> Sun, 15 Apr 2012 03:31:35 +0000 http://m1arifles.com/forum/index.php/topic/2894-sprung-for-a-new-springfield/ Is this just a bad idea????????? http://m1arifles.com/forum/index.php/topic/2937-is-this-just-a-bad-idea/ Well as luck would have it I will be a proud new owner of an M1A my grandfather has had for 20 years or so. He has probably put around 300ish rounds down the pipe himself and I would guess no more than a hundred from other people shooting it. He said next time I am up at his place visiting it will be mine. He is getting a little to old to handle the rifle. He hunts with his 270. It is a fantastic rifle and shoots great. It is well taken care of. Anywho this has got me thinking. I am going to leave his rifle completely like it is. All USGI (except receiver obviously) and nice wood stock. Now I am wondering what to do with my m1a in a vltor stock. Any advice from this crowd would be welcomed. I am thinking to either send it in for a new barrel (18.5) to make it handier and add the aimpoint like I was originally thinking, Keep the 22 inch barrel and add aimpoint or stronger optic for long range shooting, or sell it and fund other projects. Maybe pick up another rifle in 308/762. So many options........What to do Fri, 13 Apr 2012 23:04:37 +0000 http://m1arifles.com/forum/index.php/topic/2937-is-this-just-a-bad-idea/ <![CDATA[Looked at a couple m1a's today]]> http://m1arifles.com/forum/index.php/topic/2946-looked-at-a-couple-m1as-today/ Fri, 13 Apr 2012 15:27:39 +0000 http://m1arifles.com/forum/index.php/topic/2946-looked-at-a-couple-m1as-today/ reload and release http://m1arifles.com/forum/index.php/topic/2926-reload-and-release/
When the magazine is empty, with my index finger, I extend it and can depress the mag release tab, which release the magazine. Then I take my left hand off the forearm and grab a new mag and knock the other one out (since it was released and is just kinda hanging there) and then rock the new one in. It works great because I can always keep my right hand on the grip and ready to engage the target. I never have to break my grip. Then to release the op rod I reach under the rifle and release the op rod. I know most reach over the rifle to release the op rod but I have found it easier to reach under and release especially since your hand is already under the rifle from inserting the magazine. Also, when you reach under your rifle your forearm is used to help keep the rifle up and on target.

I have screwed around with this a lot and this method, for me, shaves off valuable time in reloading my weapon. I never have to break my grip and my sights never leave the target. Mag changes and releasing the op rod can be damn near as quick as the AR system.

I may take a video and post it to give you a better idea of what I am talking about. I don't know. It depends on how much time I have.

Just wanted to share.]]> Tue, 10 Apr 2012 05:54:25 +0000 http://m1arifles.com/forum/index.php/topic/2926-reload-and-release/ <![CDATA[New to M1A's.. just got one yesterday, quick question]]> http://m1arifles.com/forum/index.php/topic/2924-new-to-m1as-just-got-one-yesterday-quick-question/ Sun, 08 Apr 2012 19:57:30 +0000 http://m1arifles.com/forum/index.php/topic/2924-new-to-m1as-just-got-one-yesterday-quick-question/ Range Update 2: Stronger with the force but no Jedi yet! http://m1arifles.com/forum/index.php/topic/2917-range-update-2-stronger-with-the-force-but-no-jedi-yet/ Got the three main things recommeded by the awesome core group of contributors to this site - a Sadlak Nat Match Op Spring Guide (impressive), a Sadlak TiN plated Piston and some Gas Cylinder /Barrel Band shims. (My barrel band was so loose you could wiggle it.) Disassembled my M1a Standard for the first time and installed these parts. It was great experience just disassembling the M1a. The only major "bump" in the road was that the gas plug was insanely tight. With a gas cylinder/barrel stabilizing tool working opposite the gas plug wrench I still could not break the plug free and in fact was worried that I would strip the plug bolt. Ended up going to the hardware store and getting some PB Blaster liquid wrench and spraying that into the piston chamber (since I knew I would be cleaning out the chamber and replacing the piston anyway.) This worked really well and after letting it sit about one hour I was able to break the plug bolt loose and get into the gas chamber. By the way - after only about 300 rounds fired I was amazed at how dirty the plug and chamber were. I think I'll make sure I clean the chamber at least every 200 rounds if not more often. Now that the plug is freed up it is easy to add that to the routine cleaning regimen. I put some Permatex Anti-Seize on the gas plug threads when I reassembled but may have used a little too much, or been a little too gentle re-tightening it because it came a little ways loose when shooting today and I had to tighten it up again.
I did remove the muzzle brake instead of cutting the shims. I could not find SEI Castle Nut pliers, but on Amazon I found some heavy duty castle nut pliers (I was really hesitant to get the ones commonly available since those had gotten horrible reviews.) The heavy duty ones are excellent - they worked immediately and look like they will continue to do so. They are made by AR Specialties and on Amazon are ASIN #B0071P6D3A. They are $28.95 which is more than the $10.00 - $14.00 ones, but again they look like they will last a lot more than one use which is more than some reviewers were saying about the $14.00 ones!
I had gotten a bunch of Rem UMC 150Gr for a good price and got out today to try it out and see how the upgrades went. The short version is that the UMC shot "OK", I think my M1a liked the Federal better. (To give Remington credit there are M1a owners who get great results with it - mine just seemed to like the Federal better.) My grouping is better but still needs work. I defintely need to shoot some 168Gr Nat Match quality ammo as a means of comparison. I suspect that I will find that it shoots even better yet and that I will transition to that. I was grouping about 2" x 2" at 50 yards - not too bad but should be better. It took a few boxes to settle in - I remember one of you saying to be patient with a clean barrel and with new ammo because sometimes it takes a mag or two to settle in. Thanks for that - it helped me be patient and proved to be true. After a couple mags the UMC did settle in, but again I need to get some Nat Match as a final means of ruling out ammo as a potential factor.
Lessons Learned:
Do homework first but don't be afraid to dive in and disassemble and upgrade your weapon. It is was awesome fun and now I know my weapon much better. Total cost of those upgrades plus shipping was $98.93. And they did help. Likely the most effective upgrade was the gas shims and that cost only $14.99.
Be patient with a new ammo on the range - give it at least a couple mags to prove itself - especially with a freshly cleaned barrel.
Be patient looking for the right ammo - keep trying stuff.
Get heavy duty castle nut pliers so removing the muzzle brake or flash hider is no big deal. (Don't forget the set screw in front of the front sight!)
Be prepared for a battle the first time you remove your gas plug - but be careful!!! Don't strip that darn thing - use liquid wrench if you have to, just make sure you clean it out after. Then put a dab of grease (recommended in the manual) or something similar on the plug threads so you only have to fight that battle once.
I'll keep you all updated - may need to wait a paycheck before I get the 168Gr "good stuff". I wanted to post some pics of my front sight day-glo paint job but it looks like I took them as too large a file size, I'll need to reshoot them at a lower quality I guess.
AS ALWAYS THANKS TO YOU GUYS FOR THE INFO, ADVICE AND SUPPORT!!]]> Sun, 08 Apr 2012 02:26:08 +0000 http://m1arifles.com/forum/index.php/topic/2917-range-update-2-stronger-with-the-force-but-no-jedi-yet/ CBC rounds 1975 http://m1arifles.com/forum/index.php/topic/2919-cbc-rounds-1975/ http://www.thegunzone.com/30cal.html


83 guns destroyed so far, and who knows how much of it is left floating around! Anyone have any kind of updates from this?]]> Sat, 07 Apr 2012 07:35:40 +0000 http://m1arifles.com/forum/index.php/topic/2919-cbc-rounds-1975/ While my M1A is apart http://m1arifles.com/forum/index.php/topic/2918-while-my-m1a-is-apart/   The things for cleaning it initially would be what? Prep-All wax and grease remover or brake cleaner, too harsh? I have a package from Brownells on its way that contains Lubriplate 130-A, Dewey muzzle guide, shooters choice bore cleaner, gas cylinder shim set, sadlak operator spring guide, bolt roller greaser, and extreme weapons lube. Any complaints with anything on this list? I have seen videos on what to grease and what to oil but no one mentioned initial thorough cleaning. Any input is GREATLY APPRECIATED, and PLEASE note if the info is first hand experience or herd it through the grape vine kinda thing. THANKS to everyone!!!!!!!

Oh yeah, on the gas plug, do I put lubriplate on the threads or something just for ante-seize?]]> Sat, 07 Apr 2012 07:17:06 +0000 http://m1arifles.com/forum/index.php/topic/2918-while-my-m1a-is-apart/ Soft Case suggestions for my M1A Loaded http://m1arifles.com/forum/index.php/topic/2922-soft-case-suggestions-for-my-m1a-loaded/ Sat, 07 Apr 2012 05:52:37 +0000 http://m1arifles.com/forum/index.php/topic/2922-soft-case-suggestions-for-my-m1a-loaded/ You guys sux!!!! http://m1arifles.com/forum/index.php/topic/2914-you-guys-sux/ Fri, 06 Apr 2012 17:27:14 +0000 http://m1arifles.com/forum/index.php/topic/2914-you-guys-sux/ Handguard Replacement http://m1arifles.com/forum/index.php/topic/2871-handguard-replacement/ Thu, 05 Apr 2012 04:07:23 +0000 http://m1arifles.com/forum/index.php/topic/2871-handguard-replacement/ Magazine releases http://m1arifles.com/forum/index.php/topic/2808-magazine-releases/ Tue, 03 Apr 2012 12:19:57 +0000 http://m1arifles.com/forum/index.php/topic/2808-magazine-releases/ Did a couple of the recommended upgrades tonight http://m1arifles.com/forum/index.php/topic/2829-did-a-couple-of-the-recommended-upgrades-tonight/ Tue, 03 Apr 2012 03:44:04 +0000 http://m1arifles.com/forum/index.php/topic/2829-did-a-couple-of-the-recommended-upgrades-tonight/ Normal wear? http://m1arifles.com/forum/index.php/topic/2854-normal-wear/
Posted Image]]> Tue, 03 Apr 2012 03:40:34 +0000 http://m1arifles.com/forum/index.php/topic/2854-normal-wear/ Loaded Standard Take down http://m1arifles.com/forum/index.php/topic/2888-loaded-standard-take-down/ It ought to be interesting, this'll be the second time since I got the rifle new in 2001 that I'll have stripped it that far.]]> Mon, 02 Apr 2012 16:50:50 +0000 http://m1arifles.com/forum/index.php/topic/2888-loaded-standard-take-down/ New M1A Loaded, who makes the NM 308 Carbon Barrel now? http://m1arifles.com/forum/index.php/topic/2874-new-m1a-loaded-who-makes-the-nm-308-carbon-barrel-now/

Thanks]]> Mon, 02 Apr 2012 14:20:43 +0000 http://m1arifles.com/forum/index.php/topic/2874-new-m1a-loaded-who-makes-the-nm-308-carbon-barrel-now/ Prvi ammo? http://m1arifles.com/forum/index.php/topic/2878-prvi-ammo/ Sun, 01 Apr 2012 13:49:42 +0000 http://m1arifles.com/forum/index.php/topic/2878-prvi-ammo/ Problem with elevation sight http://m1arifles.com/forum/index.php/topic/2873-problem-with-elevation-sight/
Thanks for any suggestions.]]> Sun, 01 Apr 2012 12:14:41 +0000 http://m1arifles.com/forum/index.php/topic/2873-problem-with-elevation-sight/ Shimming the gas system on M1A http://m1arifles.com/forum/index.php/topic/2868-shimming-the-gas-system-on-m1a/ I am new to the M1A, just got my scout squad yesterday! I have the tools for the GS work but am curious where the shims go. Is it between the barrel band and barrel on the receiver side of the band? How can you tell if the GS is loose? Is it about how the gas cylinder lock tightens to the cylinder or is it something you can tell without disassembly, like a little play in the barrel band? M21guy said in another thread that most are loose right from the factory. Any help is greatly appreciated. Fri, 30 Mar 2012 22:18:24 +0000 http://m1arifles.com/forum/index.php/topic/2868-shimming-the-gas-system-on-m1a/ <![CDATA[Will "out of stock be a probelm?"]]> http://m1arifles.com/forum/index.php/topic/2837-will-out-of-stock-be-a-probelm/ Fri, 30 Mar 2012 17:31:12 +0000 http://m1arifles.com/forum/index.php/topic/2837-will-out-of-stock-be-a-probelm/ Took the plunge http://m1arifles.com/forum/index.php/topic/2843-took-the-plunge/
Frank]]> Fri, 30 Mar 2012 04:20:45 +0000 http://m1arifles.com/forum/index.php/topic/2843-took-the-plunge/ Garand Terminology http://m1arifles.com/forum/index.php/topic/2866-garand-terminology/ I'm new to the M1A world. You know how this happens........ got a chance to fire a friend's Springfield M1A and decided I had to have one. I read up a lot on this subject but I am bit confused on the terminology used to describe the different versions of this rifle. It was designed by John Garand.. got it. The M1A is the civilian version of the M14. But what is the M1 carbine, M1 Garand ? It is my understanding that the Garand (carbine ?) is chambered in 30.06 ? Or is this not correct. I'd like to get this straight in my head so I know what I'm dealing with and reading about in the forums. Thank you]]> Tue, 27 Mar 2012 20:54:54 +0000 http://m1arifles.com/forum/index.php/topic/2866-garand-terminology/ Status report and CMI question http://m1arifles.com/forum/index.php/topic/2848-status-report-and-cmi-question/ Tue, 27 Mar 2012 20:52:39 +0000 http://m1arifles.com/forum/index.php/topic/2848-status-report-and-cmi-question/ Upgrades? http://m1arifles.com/forum/index.php/topic/2867-upgrades/ Would it be better to shim,and replace the piston at the same time I replace the gas plug?Also what grease is everyone using? Tue, 27 Mar 2012 02:23:06 +0000 http://m1arifles.com/forum/index.php/topic/2867-upgrades/ Question on the Schuster adjustable gas plug http://m1arifles.com/forum/index.php/topic/2853-question-on-the-schuster-adjustable-gas-plug/ Mon, 26 Mar 2012 19:43:37 +0000 http://m1arifles.com/forum/index.php/topic/2853-question-on-the-schuster-adjustable-gas-plug/ New Rogue Build with parts from Wolfe? LRB? http://m1arifles.com/forum/index.php/topic/2838-new-rogue-build-with-parts-from-wolfe-lrb/ http://www.shop.m-14...irearms_c18.htm  I have one Rogue Stock left.

For you guys that want to build your own.  It isn't that hard, especially if you start with a barreled action and bolt as linked above.  I haven't dealt with John but I was looking...

  You can start with a barreled/bolt action and do the rest yourself at quite a savings. Doesn't really take any special tools. His GI parts prices sure seem nice.

Wolfe has got a LRB barreled action w/LRB Bolt for $1250. Includes Barrel of your choice including our Wolfe Modified Medium weight stainless steel, chrome lined and fluted 18'5" barrels. Seems like a sweet price compared.

Barrelled action/bolt is on back order though... I hate back ordered.... LRB has just a receiver at $890 so it is a pretty good deal.

Went to LRBs site and they have a barreled action for  $1495. Includes new Criterion U.S. manufactured NM quality barrel (not chrome lined), original USGI complete bolt, assembled and headspaced...

He has USGI Parts.. Gas Cylinders for only $65.  Trigger group $224 Op Rod $225.  Looks like a full weapon is running about $2000 in parts less the stock.

Plus a Rogue stock....Jeez... Wish I picked up some more Rogues on that Christmas sale at $999.  Puts a full weapon at $3000.  I have one more Rogue stock left. I am waiting to pick up a couple more of the new colored stocks.   Guess I am going to call LRB, and see what is in stock there.   I will let you know.  Probaly use some Sadlak parts or see what I got laying around in the parts drawer.

Anyone out there had any dealings with Wolfe?

Is there any interest out there to follow a build, from barreled action to finish?  or is this old hat to you guys here?  I haven't ever photographed a full build, but it might be something fun.  It makes it easier for beginners on a budget to buy a bit here and there.

Comments please.]]> Mon, 26 Mar 2012 14:50:16 +0000 http://m1arifles.com/forum/index.php/topic/2838-new-rogue-build-with-parts-from-wolfe-lrb/ looking to trade for a springfield m1a http://m1arifles.com/forum/index.php/topic/2862-looking-to-trade-for-a-springfield-m1a/
My rifle has been glass bedded and has the following
26in fluted barel
40x externally adjustable trigger
bell & carlson stock
nightforce 1 piece 20 moa mount
bipod
case
load work
laser cartridge bore sightee
e-mail me at brianb1998@gmail.com
or text/call 562-260-9158

Attached Thumbnails

  • remy.jpg
]]> Mon, 26 Mar 2012 06:41:29 +0000 http://m1arifles.com/forum/index.php/topic/2862-looking-to-trade-for-a-springfield-m1a/ Trigger: Talk about consistant ;) http://m1arifles.com/forum/index.php/topic/2683-trigger-talk-about-consistant/ Sun, 25 Mar 2012 15:24:29 +0000 http://m1arifles.com/forum/index.php/topic/2683-trigger-talk-about-consistant/ Range Update http://m1arifles.com/forum/index.php/topic/2856-range-update/ Slayer thanks again for your input about cleaning methods - I got everything you recommended and am impressed with the Dewey cleaning rod and muzzle protector. The patches are perfect.
A couple questions for everyone...
- Should I bother taking the muzzle brake off when doing routine cleaning (such as just the bore)? If I do will I need to re-adjust front sight? It looks like probably not, but obviously it can't take much to get the sight off. Along those lines how much breakdown should I do for a "routine cleaning"?
- I noticed that after setting 100yds on the elevation knob it skips back one click when firing the first shot, then does not skip any more unless I change the range then it does it again just one click. I tightened the screw that holds the elevation knob but it still does the one click skip on just the first shot.
- Which castle nut pliers should I get - can I just get them at the hardware store? The reason I ask is that there were some pretty unhappy reviews on Brownell's of a couple pliers that failed on the first use.
Thanks in advance everyone - good to be back. I'll let you all know how the Remington UMC shoots.]]> Sun, 25 Mar 2012 14:58:40 +0000 http://m1arifles.com/forum/index.php/topic/2856-range-update/ Standard M1A Upgrade recommendations? http://m1arifles.com/forum/index.php/topic/2857-standard-m1a-upgrade-recommendations/ Again I realize there is a lot of ground that could be covered here - but basically to reword - What are a few of the first improvements you would want to do for a Standard M1A? As always thanks in advance, and my regards to all of you. There are some great people on this site.]]> Sun, 25 Mar 2012 04:33:29 +0000 http://m1arifles.com/forum/index.php/topic/2857-standard-m1a-upgrade-recommendations/ MISFEED??? http://m1arifles.com/forum/index.php/topic/2845-misfeed/
Thanks
John]]> Sat, 24 Mar 2012 07:10:54 +0000 http://m1arifles.com/forum/index.php/topic/2845-misfeed/ <![CDATA[I'm looking for a scope mount]]> http://m1arifles.com/forum/index.php/topic/2850-im-looking-for-a-scope-mount/ Sat, 24 Mar 2012 05:52:18 +0000 http://m1arifles.com/forum/index.php/topic/2850-im-looking-for-a-scope-mount/ <![CDATA[Here's a real collectors item]]> http://m1arifles.com/forum/index.php/topic/2830-heres-a-real-collectors-item/ Piston bore is waaaay off center.
It's rare that a bad part gets out but here's proof they didn't get them all.
A USGI gas cylinder marked with the stock # P/N7790702 on the top flat.

The kicker is that some ole boy at Quantico never noticed it before or after unitizing it. :huh:

Attached Thumbnails

  • 001.JPG
]]> Thu, 22 Mar 2012 11:23:34 +0000 http://m1arifles.com/forum/index.php/topic/2830-heres-a-real-collectors-item/ FAL or Socom? http://m1arifles.com/forum/index.php/topic/2766-fal-or-socom/ The FAL breaks down into pieces that will fit in a pack, while the Socom seems to be better quality. My major concern about the trade is the drop in velocity from the Socoms shorter barrel. Has anyone here ran one over a chrono to get an idea of the velocity loss? What parts will I have to invest in to keep it running for a long time? Also, I have read reviews that say the Socom is a 300 yard gun. My FAL is not real good at 100 yards, but is great for laying down fire at 5-600 yards. Will I be able to mount a scope and reliably hit a man sized target at 500 yards? I did a little competitive shooting in the Army, so am no stranger to shooting at distance. I realize that asking this on this forum is akin to asking the Chevy dealer who makes the best truck, but if this trade was for a standard M1A, it would already be a done deal. We plan to go shoot them both next weekend, and that will tell the tale. Thanks for your time.]]> Thu, 22 Mar 2012 05:04:34 +0000 http://m1arifles.com/forum/index.php/topic/2766-fal-or-socom/ Need to order a Bi Pod http://m1arifles.com/forum/index.php/topic/2823-need-to-order-a-bi-pod/
Where can I find one?


Thanks in advance.]]> Wed, 21 Mar 2012 11:30:08 +0000 http://m1arifles.com/forum/index.php/topic/2823-need-to-order-a-bi-pod/ M1A Newbie http://m1arifles.com/forum/index.php/topic/2820-m1a-newbie/ Rather than bore members with the typical questions is their someplace in the forum where I can  read beginner info ? I live in the PRK (People's Republic of Kalifornia) and just started the waiting period so it will be another week before I get my Springfield loaded M1A with syn. stock. Can't wait to shoot this. Any ammo brand or type to definitely avoid ? Should I lube it before firing for the first time ? Thanks for any input.]]> Wed, 21 Mar 2012 08:12:45 +0000 http://m1arifles.com/forum/index.php/topic/2820-m1a-newbie/ About to buy a scope mount http://m1arifles.com/forum/index.php/topic/2825-about-to-buy-a-scope-mount/
I want a good scope mount, preferably be able to still use iron sights...but not required.

http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=290681565542

I want 2 screws going into the gun, vs the one. This one has it.

Not using it for anything other than a little target practice and hunting hogs.

Just wanting yalls opinion on this mount.  Thank you.]]> Tue, 20 Mar 2012 01:07:37 +0000 http://m1arifles.com/forum/index.php/topic/2825-about-to-buy-a-scope-mount/ Brownells http://m1arifles.com/forum/index.php/topic/2810-brownells/ I was unable to locate these parts in my catalog, but my catalog is a 2011. They could very well be in the 2012 catalog.
Past experience with Brownells brand products has been A++. I'm curious to know how these stack up. I guess it's nice to have more options.]]> Sun, 18 Mar 2012 16:45:11 +0000 http://m1arifles.com/forum/index.php/topic/2810-brownells/ Reloading http://m1arifles.com/forum/index.php/topic/2802-reloading/
Thanks for your advice. byronix]]> Fri, 16 Mar 2012 16:34:40 +0000 http://m1arifles.com/forum/index.php/topic/2802-reloading/ Range Report http://m1arifles.com/forum/index.php/topic/2756-range-report/
I got my portable shooting table out of the garage and set it up and got my stuff arranged.
Posted Image
Posted Image

100 yards distance....
Posted Image

Here's the two different types of ammo I was using.
Posted Image
Posted Image

Here's my first five round grouping with the Hornadys. I put the first round in the upper portion of the hole on the left side, the second round went into the right hole, third round went back over to the first hole on the left, and the last two went through on the right. Weird, huh? I took my time, didn't pull, anticipate or flinch in any way, and had a SOLID rest. The second stage of the match trigger needs some cleaning up. There's not much creep, but it's a tad too heavy for my liking.
Posted Image

My second five rounds were even more disappointing. I took my time, allowing the barrel to cool between groups, so heat wouldn't be a factor.
Posted Image

I got a little worried and figured it was time to try some of the Hirtenbergers. The results weren't any better....
Posted Image

Overall, I'm kind of bummed. My expectations were for a group no bigger than 1-1/4". It looks like I've got to spend some more money to get this rifle to meet my expectations. I'm going to recheck my mount as I didn't have a torque driver to measure my mount installation. I did notice that I had to adjust the scope both left and down a long way to dial in my zero. I don't have much adjustment left in those directions as it stands now. The rifle's headspace tag reads 1.631" so that's on the tight side. When I cleaned the rifle initially, the patch came out dirty, as if the rifle had been fired several times before I bought it. If my mount checks out, I guess my next plan of action will be to replace the gas cylinder assembly with the unitized National Match version. Is this something I can do pretty easily with basic tools, or would I need to buy some special items to make the switch? I'm about tapped out in the spendable income dept. so I'm going to have to tackle as much of this upgrade as possible on my own. I'm going to need some info on doing the triggerwork as well. There's a gun show going on this coming weekend in a nearby city, so I might could pick up some of the necessary items there.

***Small Update, I started removing the Burris scope rings from the mount and noticed that the clamping nuts seemed very easy to loosen. I may be that I didn't tighten the nuts adequately enough to seat the cross bolts firmly enough. This might not have anything to do with the rifle afterall! I gotta retest.....***]]> Fri, 16 Mar 2012 15:24:25 +0000 http://m1arifles.com/forum/index.php/topic/2756-range-report/ Front sight http://m1arifles.com/forum/index.php/topic/2789-front-sight/ Wed, 14 Mar 2012 03:59:57 +0000 http://m1arifles.com/forum/index.php/topic/2789-front-sight/ Slayer 67 -69 http://m1arifles.com/forum/index.php/topic/2791-slayer-67-69/
You mentioned great success with reloading your own. What powder would you suggest, what brass, and what primers? I would want to load Nosler 165 grain accubond and also Barnes 168 grain TTSX.

Also after field stripping my rifle and re-assembling it. Does it take 50 plus rounds for the metal to settle out on the stock for accuracy purposes as mentioned on the site??

Thanks for your input and opinon. Byronix]]> Sun, 11 Mar 2012 20:36:53 +0000 http://m1arifles.com/forum/index.php/topic/2791-slayer-67-69/ Ammunition http://m1arifles.com/forum/index.php/topic/2787-ammunition/
My biggest question? How about Silver State Armory loaded ammunition for my M1-A?

Reloading for my M1-A: Hodgdon Varget Smokeless Powder and CCI 7.62mm NATO-Spec Military Primers #34. Is this what I should use?

Thanks. Byronix]]> Sun, 11 Mar 2012 01:27:53 +0000 http://m1arifles.com/forum/index.php/topic/2787-ammunition/ Cleaning Standard M1A http://m1arifles.com/forum/index.php/topic/2784-cleaning-standard-m1a/ Sun, 11 Mar 2012 01:08:26 +0000 http://m1arifles.com/forum/index.php/topic/2784-cleaning-standard-m1a/ RIG +P http://m1arifles.com/forum/index.php/topic/2767-rig-p/ Sat, 10 Mar 2012 16:16:36 +0000 http://m1arifles.com/forum/index.php/topic/2767-rig-p/ Has anyone tried the Ruag zinc plated steel case in 7.62 x 51 nato or .308 win? http://m1arifles.com/forum/index.php/topic/2753-has-anyone-tried-the-ruag-zinc-plated-steel-case-in-762-x-51-nato-or-308-win/ Has anyone tried the Ruag zinc plated steel case in 7.62 x 51 nato or .308 win?

What is reliable but less expensive 7.62 x 51 nato or .308 win ammo?

I want to stock up an emergency supply of 1000 rounds and shoot it off at the range over the next few years. But this round is expensive!

Has anyone tried the Ruag zinc plated steel case? does it work relaibly? here is some data:


http://www.ammunitiontogo.com/produc...teel-case-ammo

200rds - 308 Win. Ruag 145gr. FMJ Zinc Plated Steel Case Ammo $73.95
This is .308 Win. Ruag 145gr. Full Metal Jacket Zinc Plated Steel Case Ammo. The NATO calibre 7.62x51 (.308) is gaining popularity again and allows effective operative ranges of more than half a kilometre. This Ruag round offers a solution for machine gun and precision shooters. Modern production and high quality controls ensure reliablility even under extreme conditions.This ammo comes packed in 20rd. boxes.]]> Fri, 09 Mar 2012 20:01:16 +0000 http://m1arifles.com/forum/index.php/topic/2753-has-anyone-tried-the-ruag-zinc-plated-steel-case-in-762-x-51-nato-or-308-win/ New here with a big question http://m1arifles.com/forum/index.php/topic/2750-new-here-with-a-big-question/ Mon, 05 Mar 2012 06:50:47 +0000 http://m1arifles.com/forum/index.php/topic/2750-new-here-with-a-big-question/ New buyer. Loaded with questions. http://m1arifles.com/forum/index.php/topic/2764-new-buyer-loaded-with-questions/
First off I'm a bit new to these type of rifles.  I've shot a lot of rounds through them before but I've never disassembled one or worked on one and though I am familiar with their history and how they operate, I still consider my overall knowledge of these rifles to be down at novice level.

I've narowed my choices down to the Standard, Scout and Loaded models.  The other options are very nice but either too expensive or too bulked up with rails in my opinion.  Anyways, on to the questions...

Though I haven't been able to confirm it for myself, I've been told by the one of the workers and owner/manager at a gun store when looking at some of the different models that other than barrel length, the Scout and standard are basically the same and that they disassemble for cleaning and maintenance the same way but that I basically need a tool chest (torque wrenches, gunsmith's hammer, punches, screw drivers etc) to do the same disassembly to a Loaded or any model with a match barrel.  Is that true or have I been told a bunch of BS?  I take extra care of all my firearms so taking care of one won't be an issue.  I'd just like to know if I need to go do some tool shopping if I decided to go with the Loaded.

My next question is about ammo.  Is there any type or brand of .308 I should avoid or not use at all in this rifle?  I've been told so much crap about ammo that I'm starting to get confused.  Most of the "crap" I am talking about is about using .308 or military 7.62x51.  I've been told to only use one or the other by some and that I'm fine with either or by others.

As far as cleaning and lubrication goes is there anything special that this rifle requires?  Again this is another topic where I've been given different answers and suggestions, mostly about lubrication.  A heavier type grease like mobil 1 is what has been reccomended to me the most, while others say oil or the tw-25b grease that I already have is perfectly fine.

My last question is about the Loaded model.  This isn't really one of those "which one should I buy" type questions but rather me asking if the extra money is worth it for the type of shooting I plan on doing which is mostly just for fun and hunting.  More so for fun since I usually only hunt once a year during season and just shoot a lot when I can.

Thanks for the time and any and all helpful insight.  I am glad to be here and can't wait to own one of these rifles.  Pics will go up as soon as I get home with mine.]]> Sat, 03 Mar 2012 14:56:41 +0000 http://m1arifles.com/forum/index.php/topic/2764-new-buyer-loaded-with-questions/ National match cleaning http://m1arifles.com/forum/index.php/topic/2761-national-match-cleaning/ Has anyone else heard this, and what level of disassembly for cleaning is adequate?
Thanks, Andy]]> Sat, 03 Mar 2012 02:00:37 +0000 http://m1arifles.com/forum/index.php/topic/2761-national-match-cleaning/ Magazines to avoid? http://m1arifles.com/forum/index.php/topic/2759-magazines-to-avoid/ Fri, 02 Mar 2012 23:06:55 +0000 http://m1arifles.com/forum/index.php/topic/2759-magazines-to-avoid/ Sadlak NM parts for M1A SOCOM 2 http://m1arifles.com/forum/index.php/topic/2758-sadlak-nm-parts-for-m1a-socom-2/ Does anyone know if I can put in a SADLAK NM M14/M1A spring guide and a SADLAK NM Groove Gas Cylinder Piston in my SA M1A SOCOM 2. According to their website it looks as though I should be able to install them. I have a chance to get these parts at a great price and would like to think they will help improve accuracy. Fri, 02 Mar 2012 03:46:45 +0000 http://m1arifles.com/forum/index.php/topic/2758-sadlak-nm-parts-for-m1a-socom-2/ <![CDATA[how do I take off my M1A's flash supressor?]]> http://m1arifles.com/forum/index.php/topic/2760-how-do-i-take-off-my-m1as-flash-supressor/
Do i need a special tool?

thanks]]> Fri, 02 Mar 2012 03:28:42 +0000 http://m1arifles.com/forum/index.php/topic/2760-how-do-i-take-off-my-m1as-flash-supressor/ My Socom16 http://m1arifles.com/forum/index.php/topic/2709-my-socom16/ http://www.skdtac.com/Ready-Ta.....dt.111.htm   The SS mags look good with the black stock, kinda like parade, but it's practical for me in this humid, swampy,  sub tropical climate.   I was going to put a Safari Ching Sling on it, but don't want leather, so I went with a T.I.S. Quick cuff sling. http://www.tacticalinterventio.....eltwo.html   I put a NCstar 4X32 long eye relief scope on it and am wating for the bore sight to show up from CTD, to sight it in. I'm from the bore sight school, since ammo is $2 a pop. ]]> Sat, 25 Feb 2012 23:13:13 +0000 http://m1arifles.com/forum/index.php/topic/2709-my-socom16/ Highlighting rear sight markings http://m1arifles.com/forum/index.php/topic/2680-highlighting-rear-sight-markings/ Sat, 25 Feb 2012 20:02:10 +0000 http://m1arifles.com/forum/index.php/topic/2680-highlighting-rear-sight-markings/ Iron Sights http://m1arifles.com/forum/index.php/topic/2742-iron-sights/ Just wondering if any of you M1A experts out there shoot Iron sights. And if you do ,do you still have the original iron sights or did you op to go with after market sights? What kind works best for you on your weapon? Sat, 25 Feb 2012 08:04:08 +0000 http://m1arifles.com/forum/index.php/topic/2742-iron-sights/ Op Rod Problem http://m1arifles.com/forum/index.php/topic/2708-op-rod-problem/ Thu, 23 Feb 2012 15:38:03 +0000 http://m1arifles.com/forum/index.php/topic/2708-op-rod-problem/ Question before purchase - seeking advice. http://m1arifles.com/forum/index.php/topic/2704-question-before-purchase-seeking-advice/ Wed, 15 Feb 2012 14:04:16 +0000 http://m1arifles.com/forum/index.php/topic/2704-question-before-purchase-seeking-advice/ New M1A Loaded http://m1arifles.com/forum/index.php/topic/2711-new-m1a-loaded/ Not a rifle guy, but really into 1911 pistols.  I have wanted a M1A and finally grabbed one today.  Is there a suggested barrel break in or anything I should be sure and do first?  Thanks.  Going to look at putting a scope on it and any suggestions on what products would enhance that best would be greatly appreciated. Tue, 14 Feb 2012 20:14:38 +0000 http://m1arifles.com/forum/index.php/topic/2711-new-m1a-loaded/ <![CDATA[I'm finally getting my Scout Squad M1A!]]> http://m1arifles.com/forum/index.php/topic/2599-im-finally-getting-my-scout-squad-m1a/ Posted Image m14brian]]> Sun, 12 Feb 2012 06:15:40 +0000 http://m1arifles.com/forum/index.php/topic/2599-im-finally-getting-my-scout-squad-m1a/ M1A question http://m1arifles.com/forum/index.php/topic/2690-m1a-question/ Sun, 12 Feb 2012 05:10:32 +0000 http://m1arifles.com/forum/index.php/topic/2690-m1a-question/ About to buy http://m1arifles.com/forum/index.php/topic/2687-about-to-buy/ Sat, 11 Feb 2012 23:17:22 +0000 http://m1arifles.com/forum/index.php/topic/2687-about-to-buy/ Zeroing http://m1arifles.com/forum/index.php/topic/2701-zeroing/ I have just put a tin coated Sadlak Industries gas piston in my M1-A. Will this improve accuracy? The old gas piston came with the rifle. Standard issue by Springfield. It had about 200 plus rounds through it. Thanks. Byronix Sat, 11 Feb 2012 02:38:03 +0000 http://m1arifles.com/forum/index.php/topic/2701-zeroing/ Zeroing http://m1arifles.com/forum/index.php/topic/2698-zeroing/ Thu, 09 Feb 2012 18:25:20 +0000 http://m1arifles.com/forum/index.php/topic/2698-zeroing/ Bore guide ! http://m1arifles.com/forum/index.php/topic/2686-bore-guide/ Wed, 08 Feb 2012 14:40:24 +0000 http://m1arifles.com/forum/index.php/topic/2686-bore-guide/ Eleven year Anniversary http://m1arifles.com/forum/index.php/topic/2682-eleven-year-anniversary/ Wed, 08 Feb 2012 03:45:18 +0000 http://m1arifles.com/forum/index.php/topic/2682-eleven-year-anniversary/ <![CDATA[Buyer's remorse?]]> http://m1arifles.com/forum/index.php/topic/2622-buyers-remorse/ Tue, 07 Feb 2012 00:15:24 +0000 http://m1arifles.com/forum/index.php/topic/2622-buyers-remorse/ Scout Squad Questions from a potential buyer http://m1arifles.com/forum/index.php/topic/2676-scout-squad-questions-from-a-potential-buyer/ Sun, 05 Feb 2012 14:38:26 +0000 http://m1arifles.com/forum/index.php/topic/2676-scout-squad-questions-from-a-potential-buyer/ New M1A Owner http://m1arifles.com/forum/index.php/topic/2679-new-m1a-owner/ Sat, 04 Feb 2012 22:08:16 +0000 http://m1arifles.com/forum/index.php/topic/2679-new-m1a-owner/ New to the M1A world http://m1arifles.com/forum/index.php/topic/2642-new-to-the-m1a-world/ What is the best commercial ammunition for the M1A. I have heard so much about the ammo and bullet weight and head space for  the .308 I am worried about getting the right stuff. Sat, 04 Feb 2012 07:57:57 +0000 http://m1arifles.com/forum/index.php/topic/2642-new-to-the-m1a-world/ SBR M14 http://m1arifles.com/forum/index.php/topic/2672-sbr-m14/ Posted Image Ron Smith with his new SBR (Smith Battle Rifle) at shot 2012. The SBR uses a Sage M14ALCS EBR chassis with adjustable length of pull and cheek riser height. Built on a new SEI receiver with SEI parts including a standard weight 18.0" barrel and SEI's new radial groove gas piston. It is topped with a Leupold optic. The package includes SEI's own bipod and their Vortex flash eliminator that accepts their Wind Talker suppressor. The Wind Talker is a quick-detach unit that can also be broken down without tools for cleaning. Overall weight is 12-13 pounds.  For more information, please visit smithenterprise.com, or call 480-964-1818. There will be an article covering the new SBR in American Rifleman very soon.]]> Wed, 01 Feb 2012 02:00:04 +0000 http://m1arifles.com/forum/index.php/topic/2672-sbr-m14/ Socom Modification ??/ http://m1arifles.com/forum/index.php/topic/2657-socom-modification/ Wed, 01 Feb 2012 01:58:59 +0000 http://m1arifles.com/forum/index.php/topic/2657-socom-modification/ I found the coolest thing today!!!! http://m1arifles.com/forum/index.php/topic/2666-i-found-the-coolest-thing-today/ Wed, 01 Feb 2012 01:56:53 +0000 http://m1arifles.com/forum/index.php/topic/2666-i-found-the-coolest-thing-today/ Receivers http://m1arifles.com/forum/index.php/topic/2568-receivers/ Fri, 27 Jan 2012 21:26:02 +0000 http://m1arifles.com/forum/index.php/topic/2568-receivers/ Recoil buffers http://m1arifles.com/forum/index.php/topic/2646-recoil-buffers/ Wed, 25 Jan 2012 21:16:03 +0000 http://m1arifles.com/forum/index.php/topic/2646-recoil-buffers/ Need an Ammunition Expert http://m1arifles.com/forum/index.php/topic/2634-need-an-ammunition-expert/ I have some ammo that I think is Privi Partizan (Yugoslovia??) that I would like additional informaiton: It comes in 15 round boxes and marked: Cartuchos 7.62 x 51 PPU 8907 NCD-02/M MBL 8933 the head stamp has the following:  NNY (PPU??) 89 7.62 mm and a red primer sealer. Does anyone know if this is a reloadable case Is the primer crossive? Thanks JW Thomas Sun, 22 Jan 2012 21:29:23 +0000 http://m1arifles.com/forum/index.php/topic/2634-need-an-ammunition-expert/ Bipods http://m1arifles.com/forum/index.php/topic/2626-bipods/ I am kind of on the fence about getting a bipod.  I do mostly, well, all target shooting.  I was wondering if any of you guys out there use a bipod and what kind and how you like it.  Is it worth it to spend the extra money on the Springfield one, or is a $50 knock-off ok?  If you hate them, why? Sun, 22 Jan 2012 04:44:22 +0000 http://m1arifles.com/forum/index.php/topic/2626-bipods/ M1Arifles.com mobile App + online shooting game. I need your input. http://m1arifles.com/forum/index.php/topic/2516-m1ariflescom-mobile-app-online-shooting-game-i-need-your-input/ screenshots. /wp-content/uploads/2011/12/m1agameload.jpg and the game play /wp-content/uploads/2011/12/m1agame1.jpg   Let me know what you would like to see in the app. Thanks, Jerry /wp-content/uploads/2011/12/m1agame1.jpg]]> Sun, 22 Jan 2012 04:10:32 +0000 http://m1arifles.com/forum/index.php/topic/2516-m1ariflescom-mobile-app-online-shooting-game-i-need-your-input/ heel and stock fit http://m1arifles.com/forum/index.php/topic/2640-heel-and-stock-fit/ http://m14forum.com/modern-m14.....k-fit.html  ]]> Sat, 21 Jan 2012 05:19:42 +0000 http://m1arifles.com/forum/index.php/topic/2640-heel-and-stock-fit/